Rebuild List: Rebuild List Fasteners Stud Stepped
-
Universal Thread lock, 6ml tube (loctite)MBU0851£6.32 £5.276ml tube of thread lock, ideal to use on studs, nuts and head gaskets.... Learn MoreYou'll need: 1 of these
-
Tool, Stud fitting, installer / installation tools, 6x1mm, 7x1mm, 8x1.25mm, MBMBP0596S£16.78 £13.98A set of simple MB made - 6 x 1mm, 7 x 1mm, 8 x 1.25mm stud fitting/installation tools. Finger screw in your stud, use some loctite on the thread to be fitted in the casing t... Learn MoreYou'll need: 1 of these
-
Tool, Stud fitting, installer / installation tool 6x1.0mm, MBMBP0593£5.59 £4.66A simple 6mm stud fitting/installation tool. Finger screw in your stud, use some loctite on the thread to be fitted in the casing then screw the stud into the casing until it... Learn MoreYou'll need: 1 of these
-
Tool, Stud fitting, installer / installation tool 7x1.0mm, MBMBP0594£5.59 £4.66A simple 7mm stud fitting/installation tool. Finger screw in your stud, use some loctite on the thread to be fitted in the casing then screw the stud into the casing until it... Learn MoreYou'll need: 1 of these
-
Tool, Stud fitting, installer / installation tool 8x1.25mm, MBMBP0595£5.59 £4.66A simple 8 x 1.25mm stud fitting/installation tool. Finger screw in your stud, use some loctite on the thread to be fitted in the casing then screw the stud into the casing u... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 6 to 7mm - 17x13x11mm, Lambretta crankcase side tailpipe, stainless steel, MBMBP0395£4.06 £3.38A stainless steel stepped 7mm to 6mm oversized stud to repair a damaged crankcase side tailpipe 6mm thread. If the thread has gone you could fit a Timesert or helicoil, these cost... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 6 to 7mm - 17x10x11mm, Lambretta crankcase side, stainless steel, MBMBP0394£2.84 £2.37A stainless steel stepped 7mm to 6mm oversized stud to repair a damaged crankcase side 6mm thread. If the thread has gone you could fit a Timesert or helicoil, these cost money, h... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 6 to 7mm - 10x5x14mm, Lambretta mag housings, stainless steel, MBMBP0688£2.72 £2.27This is a MB specially designed stud to suit Lambretta Mag housings where the standard 6mm thread has gone. These are stepped 7mm to 6mm and 29mm long. Made from stainless ... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 6 to 8mm - 10x5x14mm, Lambretta mag housings, stainless steel, MBMBP0689£2.98 £2.48This is a MB specially designed stud to suit Lambretta Mag housings where the standard 6mm thread has gone. These are stepped 8mm to 6mm and 29mm long. Made from stainless ... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 6 to 8mm - 17x13x11mm, Lambretta crankcase side tail pipe, stainless steel, MBMBP0278£2.84 £2.37A really simple idea from Mark Broadhurst This Stainless Steel steppped stud can repair the lower exhaust tailpipe thread that usually pulls outs. Most people dont have a Hei... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 6 to 8mm - 17x10x11mm, Lambretta crankcase side, stainless steel, MBMBP0302£4.06 £3.38A really simple idea from Mark Broadhurst This Stainless Steel steppped stud can repair all the crankcase side 6mm threads that usually pulls outs. Most people dont have a He... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 7 to 8mm - 18x8x9mm, Lambretta gearbox endplate, long type, MBMBP0459£4.06 £3.38Stepped gearbox end plate repair stud. Long, 8 x 1.25mm x 7 x 1mm Length 9 x 8 x 18mm.Drill the casing to 6.9mm deep enough to suit the extra long stud and tap to 8 x 1.25m... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 7 to 8mm - 20x8x9mm, Lambretta gearbox endplate, extra long, MBMBP0431£4.06 £3.38Stepped gearbox end plate repair stud. Extra long, 8mm x 7mm - 9 x 8 x 20mm.Drill the casing to 6.8mm deep enough to suit the extra long stud and tap to 8 x 1.25mm so the stud seat... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 7 to 10mm - 18x8x9mm, Lambretta gearbox endplate, extra long type, self colour, MBMBP0460£4.06 £3.38Stepped gearbox end plate repair stud. Long super oversize, 10mm x 7mm - 9 x 8 x 18mm.Drill the casing to 8.7mm deep enough to suit the extra long stud and tap to 10 x 1.5mm so the... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 7 to 8mm - 12x8x9mm, gearbox endplate, standard type, MBMBP0397£2.93 £2.44Made for MB Scooters this stepped oversize gearbox end plate stud from 8mm to 7mm has a little more thread for the casing and also for a fatter stronger nut with a spring washer. ... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 7 to 10mm - 17x7x12mm, Lambretta round exhaust port, stainless steel, MBMBP0630£2.99 £2.49Over size stepped exhaust port stud for Round type cylinders. Ideal to repair a cylinder where the threads have pulled out. Tap the cylinder 10 x 1.5mm. A MB design.... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 7 to 8mm - 17x7x12mm, Lambretta round exhaust port, stainless steel, MBMBP0430£4.06 £3.38This MB made stainless steel stud is a repair stud for cylinders with round exhaust ports if the threads have gone. Drill out the hole 6.9mm then tap out the the cylinder to ... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 7 to 8mm - 17x7x10mm, Lambretta oval exhaust port, stainless steel, MBMBP0429£4.06 £3.38This MB made stainless steel stud is a repair stud for cylinders with oval exhaust ports if the threads have gone. Drill the hole to 6.9mm then tap out to 8 x 1.25mm, then lo... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 7 to 10mm - 17x7x10mm, Lambretta oval exhaust port, stainless steel, MBMBP0629£3.11 £2.59Over size stepped exhaust port stud for Oval type cylinders. Ideal to repair a cylinder where the threads have pulled out. Tap the cylinder 10 x 1.5mm. A MB design.... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 8 to 12mm - 20x11x17mm, Lambretta crankcase side swan neck stainless steel, MBMBP0393£4.06 £3.38A super over sized stepped stud from 12mm to 8mm to repair a damaged crankcase side 8mm thread that has been over tapped out. If the thread has gone and is too big to fit a Timese... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 8 to 10mm - 20x11x17mm, Lambretta crankcase side swan-neck, stainless steel, MBMBP0392£1.90 £1.58A MB stepped oversized stud to repair a damaged crankcase side 8mm thread. If the thread has gone you could fit a Timesert or helicoil, but these cost more money, here is a simple... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud 8 to 10mm - 158mm, Lambretta cylinder standard relieved, Race-Tour MBMBP0697£5.98 £4.98Repair cylinder stud, stepped from 10mm to 8mm, if your casing thread has pulled out then just tap the hole out to 10 x 1.5mm and fit this stud - better than a helicoil or timesert... Learn MoreYou'll need: 1 of these
-
Lambretta Stepped stud, 8 to 10mm - 163mm, Lambretta cylinder longer relieved, Race-Tour MBMBP0613£5.98 £4.98Repair cylinder stud, stepped from 10mm to 8mm, if your casing thread has pulled out then just tap the hole out to 10 x 1.5mm and fit this stud - better than a helicoil or timesert... Learn MoreYou'll need: 1 of these