Rebuild List: Engine List Clutch 6 Plate
-
Lambretta Clutch plate kit (6 plate) (6x2.5mm friction only) MBMBGM0297K£22.39 £18.66This is a set of 6 MB thin clutch plates. They measure 2.5mm thick and can be used in various Lambretta clutch set ups using the deep crown wheel and extended spider, always helps... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch plate kit (5 plate) (5x3.5mm friction and steels) fits MB 46/47 clutch assemblies, Race-Tour MBMRB0760K£47.30 £39.42This 5 plate clutch kit suits our MB Race-Tour 46 and 47 internal clutch assembly.This kit should work quite well up around 25bhp.It comes complete with: 5 x 3.5mm MB clutch pla... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch assembly (kit) 46 tooth, 6 plate, bgmMBGM0472£462.00 £385.00BGM PRO Superstrong - the original Extremely durable clutch, easy to use - Made in Germany The Superstrong clutch combines extreme durability, absolute reliability and easy oper... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch assembly (kit) 47 tooth, 6 plate, bgmMBGM0473£462.00 £385.00BGM PRO Superstrong - the original Extremely durable clutch, easy to use - Made in Germany The Superstrong clutch combines extreme durability, absolute reliability and easy opera... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch springs (set 5) uprated, Race-Tour MBMRB0505£7.99 £6.66These are the ultimate Lambretta uprated clutch springs for standard or tuned scooters designed by Mark Broadhurst, they fit ALL 4, 5, 6, 8 or 9 plate clutch conversions. These ar... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch pressure plate (flange) deep type fits Li, Sx, Tv, Gp, Race-Tour MBMRB0751K£79.03 £65.86This is MB CNC clutch pressure plate (flange) to suit ALL clutch assemblies using internal extended spiders.It is extended longer than standard which means, when used with our MB ... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch nipple, Li, Sx, Tv, MBMBL0657£3.40 £2.83This Li, Sx, Tv nipple sits on the pin on your clutch pressure flange. Slightly redesigned thi hardened nipple is made for MB Scooters.... Learn MoreYou'll need: 1 of these
-
Lambretta Bearing, clutch needle, Li, Sx, Tv, Race-Tour MB brandMBB0125£6.43 £5.36MB made Clutch needle bearings to suit Li, Sx, Tv type clutches or any clutch which uses hardened bearing faces (not genuine Gp types) Used for their longer life in use and giving... Learn MoreYou'll need: 1 of these
-
Lambretta UNI (AF) Easy clutch assembly, GpMBL1723£47.51 £39.59Lambretta AF easy clutch assembly. This fits and works only on Gp side casings. The rack and pinion system makes pulling the clutch lever on the handle bars much easier. A very ... Learn MoreYou'll need: 1 of these
-
Lambretta Bearing, clutch needle, Li, Sx, Tv, name brandMBB0035£5.76 £4.80A high quality clutch needle bearing. Used as standard on Li SX TV models. You need two per engine. Only use these in genuine Innocenti Li type or MB 4/5/6 crownwheels as these ... Learn MoreYou'll need: 2 of these
-
Lambretta Clutch nut tab washerMBL1084£0.70 £0.58This tab washer is used to secure the clutch nut on a Lambretta.... Learn MoreYou'll need: 1 of these
-
Nut half lock 14x1.5mm, Lambretta Clutch, zinc platedMBFHN14XM150ZC£1.76 £1.47Amongst many applications this fastener can specifically be used as a Lambretta clutch nut.... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch nipple for MB pressure plates GP, Race-Tour MBMBP0653£7.55 £6.29Spare GP type nipple for our clutch pressure plate.... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch pressure pad (plunger) Gp, MBMBP0388£6.04 £5.03We were so fed up with inferior parts breaking we made our own from a stronger Brass material to the original remade items. This item sits in a GP crankcase side and is pushed o... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch steel plate, 1.0mm, MBMBP0001£3.53 £2.94Designed to use in a 5 or 6 plate clutch. Thinner to allow more room within the clutch to stop clutch drag. 4 are required in a five plate clutch 5 are required in a 6... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch steel plate, 1.2mm, MBMBP0002£3.53 £2.94Designed to use in a 5 or 6 plate clutch. Thinner to allow more room within the clutch to stop clutch drag. 4 are required for a 5 plate clutch 5 are required for a 6 ... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch steel plate, 1.5mm, MBMBP0003£3.02 £2.52These are standard remade MB clutch steel plates. 3 are required for standard 4 plate clutches. 5 are required for MB external 6 plate clutches. This is a MB remade ... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch steel plate, 2.0mm, MBMBP0478£3.08 £2.57Lambretta clutch steel plate at 2mm thiickness, this plate should be used first and fitted closest to the gearbox side. When using this plate it spreads the load on the ears so it... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch top plate, 2.0mm, super thin type, MBMBP0385£8.83 £7.36Non standard 2mm top, designed by MB to help the ever increasing, 5 and 6 plate internal clutch kits. It it gives an extra 0.50m clearance to help these clutches to work.... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch top plate, 2.5mm, thin type, Li, Sx, Tv, MBMBP0383£8.83 £7.36Stocks of SIL clutch top plates have been getting harder to find so we took the plunge and had these made. 2.5mm thick, suit LI/SX type clutch setups but can be used in other clut... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch top plate, 3.0mm, fat type, Gp, MBMBP0384£8.83 £7.36Stocks of SIL clutch top plates have been getting harder to find so we took the plunge and had these made. 3.0mm thick, suit GP type clutch setups but can be used in other clutche... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch circlip, large outer, MBMBP0437£4.80 £4.00Extra strong Large clutch outer circlip for all Series 1, 2 and 3 motors. These are wider and much stronger than the Italian original ones, which have been known to pop out. ... Learn MoreYou'll need: 1 of these
-
Lambretta Tool, Clutch compressor, MBMRB0150K£36.80 £30.67This is our MB Lambretta clutch compressing tool. Designed to safely compress your clutch while you change the clutch plates. It mounts across 2 studs on the crankcase side, so i... Learn MoreYou'll need: 1 of these
-
Lambretta Tool, Clutch holder, MBMRB0149£22.68 £18.90This is a MB steel clutch holder, which will let you safely and easily hold your clutch assembly while you undo and tighten the clutch nut. Using a screwdriver can damage your spr... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 0.8mm, MBMBP0245£2.93 £2.44Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 0.9mm, MBMBP0246£2.82 £2.35Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or standa... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.0mm, MBMBP0247£2.93 £2.44Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.1mm, MBMBP0248£2.82 £2.35Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.2mm, MBMBP0249£2.74 £2.28Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.3mm, MBMBP0250£3.00 £2.50Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.4mm, MBMBP0251£3.07 £2.56Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.5mm, MBMBP0252£2.60 £2.17Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.6mm, MBMBP0253£3.10 £2.58Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.8mm, MBMBP0255£2.70 £2.25Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 1.9mm, MBMBP0256£3.00 £2.50Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these
-
Lambretta Clutch shim, 2.0mm, MBMBP0257£2.70 £2.25Fed up with inferior remade Indian SIL clutch shims MB have remade these shims in the UK from hardened shim steel cut to fit perfect on all Series 1 2 and 3 engines tuned or stan... Learn MoreYou'll need: 1 of these