Rebuild List: Rebuild List Frame
-
Lambretta Fork steering bearing dust protection plate cover in frame, stainless steel, MBMBP0360£4.42 £3.68This item fits between the frame and the bottom fork bearing steering race on all Lambretta frames. It often gets damaged during removal for a restoration or rots over time. Here... Learn MoreYou'll need: 1 of these
-
Lambretta HT lead rubber for frame legMBL0913£0.82 £0.68This rubber fits under the frame cable tie and the HT lead runs through it.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank flap pinMBL0317£1.66 £1.38This pin hold the petrol tank flap to the frame. Brass, UK made... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank flap, steel with lock, GpMBL0828£7.80 £6.50This is a metal petrol flap with a lock and two keys. GP only.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank flap, plastic, Black, GpMBL0318£11.10 £9.25This is a plastic petrol flap for GP scooters.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tap lever frame rubber grommetMBL0542£1.39 £1.16This black grommet protects your frame where the petrol tap lever does through it and stops the lever rattling.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer set (2 back, 2 bottom, 4 side rubbers) Gp, budget versionMBP0428K£8.81 £7.34Petrol tank rubber buffer set (kit) 2 back, 2 bottom, 4 side rubbers GP type This is our MB BUDGET VERSION, these are classed as seconds, there is nothing wrong with them e... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, small, Gp, BudgetMBL0319£1.38 £1.15This a small petrol tank rubber buffer. Two are fitted on the side of the tank under the tank strap to space the tank strap away from the tank. This is the thicker Gp type.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, bottom, S3, MBMBP0560£2.42 £2.02This a MB medium petrol tank rubber buffer.Two are fitted on the bottom of the tank and fit under the tank strap and is located in the frame by a peg in the rubber to space the tan... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, small, S3, MBMBL1661£2.04 £1.70This a MB small petrol tank rubber buffer.Two are fitted on the side of the tank under the tank strap to space the tank strap away from the tank.This is the thinner Series 3 type.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, rear, each, S3, MBMBL1662£2.30 £1.92This a MB large petrol tank rubber buffer.Two are fitted on the rear of the tank and fit under the tank strap and is located in the frame by a peg in the rubber to space the tank s... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer set (2 back, 2 bottom, 4 side rubbers) S3, MBMBP0580S£17.62 £14.68Complete set of MB Series 3 petrol tank strap rubbers.2 side, 2 lower and 4 blocks.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer set (2 back, 2 bottom, 4 side rubbers) Gp, MBMBP0414S£17.04 £14.20Complete set of late type MB Series 3 petrol tank rubbers. 2 side, 2 lower and 4 blocks.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, small, Gp, MBMBP0407£2.16 £1.80This a MB small petrol tank rubber buffer.Two are fitted on the side of the tank under the tank strap to space the tank strap away from the tank.This is the thicker Gp type.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, large, each, S1/2, MBWMBL1327£2.04 £1.70This a MB large petrol tank rubber buffer.Two are fitted on the rear and lower of the tank and fit under the tank strap and is located in the frame to space the tank strap away fro... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, small, each, S1/2, MBWMBL1326£2.04 £1.70This a MB small petrol tank rubber buffer.Two are fitted on the side of the tank under the tank strap to space the tank strap away from the tank.This is the thinner Series 1/2 type... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer set (2 back, 2 bottom, 4 side rubbers) S1/2, MBWMBP0555K£16.32 £13.60Set of 8 tank rubber for your series 1 or 2 lambretta. Comprises 4 bottom and back rubbers that the tank sits on and 4 side rubbers. An MB product.... Learn MoreYou'll need: 1 of these
-
Lambretta Rear runner board support arm (bracket) stainless steel, S3, MBMBP0378£8.84 £7.37A semi polished rear runner arm to suit all Series 3 right hand floor boards. Remade for MB Scooters, can be fitted as it is, highly polished or sprayed to suit the bike. No... Learn MoreYou'll need: 1 of these
-
Lambretta Rear frame rubber bung, GreyMBL0416£1.43 £1.19These grey bungs are designed to neatly fill the holes in the back of your Series 3 frame.... Learn MoreYou'll need: 1 of these
-
Lambretta Rear frame rubber bung, BlackMBL0415£1.43 £1.19These black bungs are designed to neatly fill the holes in the back of your Series 3 frame.... Learn MoreYou'll need: 1 of these
-
Lambretta Rear shock absorber (shocker, damper) Black, S1/2/3, Bgm, V3MBGM0026£284.00 £236.67The V3 version of the BGM rear Lambretta shock absorber. Compared to its predecessor, all the proven features and the incredible robustness and durability of the V2 have been retai... Learn MoreYou'll need: 1 of these
-
Lambretta Side panel buffer and clip set, pair, S3, MBMBP0654K£11.27 £9.39A pair of Series 3 MB made side panel rubber buffers and side panel clips. 2 x buffers, MB 2 x clips, MB These spring steel clips holds the side panel buffers to the rear fl... Learn MoreYou'll need: 1 of these
-
Lambretta Side panel rubber beading, pair, Black, ItalianMBL0664PR£10.73 £8.94This is a pair of quality remade Italian black side panel rubbers for Series 1/2 & 3 scooters.... Learn MoreYou'll need: 1 of these
-
Lambretta Side panel runner arm buffer clip, steel and blacked, S3, MBMBP0110£2.33 £1.94This spring steel clip holds the side panel buffers to the rear floorboard support arms on a Series 3. Another re designed and improved MB product fitting is made easier for th... Learn MoreYou'll need: 1 of these
-
Lambretta Side panel runner arm buffer, MBMBP0416£2.47 £2.06This buffer stops your side panel wearing against the floorboard supports on a Series 3 and keeps the side panels in place. Another top quality product made for and marked with MB... Learn MoreYou'll need: 1 of these
-
Lambretta Side panel rubber beading, pair, Grey, ItalianMBL0449PR£10.51 £8.76This is a pair of quality remade Italian grey side panel rubbers for Series 1/2 & 3 scooters.... Learn MoreYou'll need: 1 of these
-
Lambretta Tool box and steering lock set, same key, S2, IndianWMBL1322S£11.34 £9.45Lambretta Tool box and steering lock set to suit Series 2, same key, Indian... Learn MoreYou'll need: 1 of these
-
Lambretta Tool lid box lock, S2, Italian, CasaWMBL1320£25.57 £21.31Series 2 toolbox lock with 2 keys. Made by Casa Lambretta.... Learn MoreYou'll need: 1 of these
-
Lambretta Tool box lid lock, Series 3, ItalianMBL0515IT£27.06 £22.55This is a lock for a Series 3 toolbox door.It comes with 2 keys. Made by Casa Lambretta ... Learn MoreYou'll need: 1 of these
-
Lambretta Tool box lid lock rivet, alloyMBL0848£0.30 £0.25The right size alloy rivet to secure your toolbox lock.... Learn MoreYou'll need: 1 of these
-
Lambretta Tool box lid rubber buffer, upper, (top) small type, each, MBMBL0511£0.53 £0.44This buffer fits into the frame on your Series 3 to stop the toolbox door rattling.You need two. Slighty redesigned by MB to make fitting easier.... Learn MoreYou'll need: 1 of these
-
Lambretta Tool box tie rod rubber bungMBL0897£1.80 £1.50This bung fits into the frame to secure the toolbox tie rods to stop them rattling.You need two per scooter.... Learn MoreYou'll need: 1 of these
-
Lambretta Tool box lid pin, Series 3, stainless steel, MBMBP0091£2.57 £2.14We were so disappointed with the variable quality of the toolbox lid hinge pins that we had a MB version made in stainless steel. These only fit Series 3 scooters.... Learn MoreYou'll need: 1 of these
-
Lambretta Tool box lid pin, stainless steel, S2, MBMBP0238£4.08 £3.40We were so disappointed with the variable quality of the toolbox lid hinge pins that MB made these in stainless steel. These only fit Series 1 or 2 scooters.... Learn MoreYou'll need: 1 of these
-
Nut dome 16x1.5mm, 27mm OD, Lambretta Rear hub, stainless steel, MBMBFDN16£10.80 £9.00This fastener is used on a Lambretta Series, 1, 2 and 3 rear hubs. It is slightly taller than normal to allow it to be used with any hub/layshaft combination. It can also be used... Learn MoreYou'll need: 1 of these
-
Nut nyloc 16x1.5mm, Lambretta Rear shock absorber and engine bar, MBMBP0144K£3.53 £2.9416 x 1.5mm Nyloc nut used for rear shock absorbers and engine bars. Perfect fitting MB nyloc nut in stainless steel. The nyloc nut can be tightened and slighty undone to allow th... Learn MoreYou'll need: 1 of these
-
Nut half lock 16x1.5mm, Lambretta Rear shock absorber (shocker, damper) stainless steelMBL1280£1.28 £1.07Amongst many applications this fastener can specifically be used as a Lambretta rear shocker nut.... Learn MoreYou'll need: 1 of these
-
Washer wavy 16mm, Lambretta rear shocker, stainless steelMBFWW16£0.76 £0.63Amongst many applications this fastener can specifically be used under the rear shocker and engine bar nuts. Specially made in stainless steel for MB Scooters.... Learn MoreYou'll need: 1 of these
-
Washer wavy 7mm, stainless steelMBFWW7SS£0.18 £0.15This fastener has universal applications but is mainly used on Lambretta inlet manifolds.... Learn MoreYou'll need: 1 of these
-
Washer wavy 7mm, stainless steel, Bag of 100MBFWW7SSBAG£8.65 £7.21This fastener has universal applications but mainly used on Lambretta inlet studs. This is a bag of 100 fasteners.... Learn MoreYou'll need: 1 of these
-
Nut nyloc 7mm, stainless steel, Bag of 100MBFNY7SSBAG£63.58 £52.98Amongst many applications this fastener can specifically be used on the Lambretta inlet studs and on the bolts that hold on the rear footboard support arm. This is a bag of 100 fa... Learn MoreYou'll need: 1 of these
-
Nut nyloc 7mm, stainless steelMBFNY7SS£0.56 £0.47Amongst many applications this fastener can specifically be used on the Lambretta inlet studs and on the bolts that hold on the rear footboard support arm.... Learn MoreYou'll need: 1 of these
-
Screw hexagon set 7x22mm, Lambretta Rear footboard arm, stainless steel, MBMBFH7X22SS£1.10 £0.92Amongst many applications this MB made stainless steel fastener can specifically be used on the Lambretta rear floorboard support arm (Series 3)... Learn MoreYou'll need: 1 of these