Rebuild List: Rebuild List Air Filter
-
Lambretta Air filter (air hose) rubber bellows, Gp125, small, Viton, S3, MBMBL0003£9.19 £7.66This is a high quality remade air hose for all 18 and 20mm SH type carburettors. It can also be used on the modern 22-25mm PHBL type carburettor. Made for MB in Viton to resist mo... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter (air hose) rubber bellows with stainless clips, 18/20mm carbs also PHBL 25mm, Viton, MBMBP0675K£16.81 £14.01Lambretta Air hose (bellows) with 2 stainless clips to suit all Series 3 engines (but not Gp150/200) or any engine fitted with a standard 18 - 20mm carb. Especially made for MB in... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter (air hose) rubber bellows, Gp150, 200, large, Viton, MBMBL0005£9.19 £7.66This is a high quality remade air hose for all 22mm SH type carburettors. It can also be used on the modern 26-30mm PHBH type carburettor. Made for MB in viton to resist modern fu... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter (air hose) rubber bellows with stainless clips Gp150/200, MBMBP0676K£16.56 £13.80Lambretta Air hose (bellows) with 2 stainless clips to suit Gp150/200 or any engine fitted with a standard 22mm standard carb. Especially made for MB in Viton to resist modern fue... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter (air hose) rubber bellows, SpanishMBL1147£14.09 £11.74Unavailable for many years, this remade hose suits Spanish Lambrettas that don't use the Italian type air boxes - i.e. ones that use half of the toolbox or ones that use the kidney... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter (air hose) bellows clip, small, stainless steel, Li, Sx, Tv, Gp125, MBMBP0080K£3.94 £3.28This is a MB remade polished stainless steel air hose clip. Fits the bottom of the air hose bellows rubber when using a standard 18/20mm carb and also when using an uprated 25mm D... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter (air hose) bellows clip, large, stainless steel, Gp150/200, MBMBP0081K£3.68 £3.07This is a MB remade stainless steel air hose clip for the top and bottom of the air hose on all 18/20mm standard carburettor bellows. Also fits at the top of the air hose on a 22m... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter box kit, S3, bgmMBGM0466£138.00 £115.00High flow Series 3 air filter box kit. Comes with Modified air filter box for improved air flow BGM high flow air filter Long air filter bolt Air filte... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter, mesh type increased air flow, standard air filter box, S3, MBMBGM0251£18.26 £15.22New replacement Air Filter from MB Scooters for Series 3 Lambrettas, it uses fine wire mesh to filter the induction air. It allows the engine to breathe easier than a standard fil... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter, mesh type Increased air flow, standard air filter box, S2, BgmMBGM0465£21.00 £17.50New replacement Air Filter by BGM for Series 2 Lambrettas, it uses fine wire mesh to filter the induction air. It allows the engine to breathe easier than a standard filter, all... Learn MoreYou'll need: 1 of these
-
Lambretta Air filter (foam) cone type for large carbs, fits against side panelMBU0447£15.12 £12.60This cone air filter can be modified by cutting a small hole just big enough to squeeze tightly over the carbs bell mouth, which will hold it tight and in position. You need to ey... Learn MoreYou'll need: 1 of these
-
Dellorto Air filter, tea strainer type, with mounting rubber, PHBH, Race-Tour MBMRB0909K£15.71 £13.09The only air filter system you will ever need for your PHBH 26, 28, or 30mm carb. Triple layered micro air filter, easily cleanable and washable and re-usable. Only measures 38mm... Learn MoreYou'll need: 1 of these
-
Dellorto Air filter, tea strainer type, with mounting rubber and plastic screw on bellmouth, PHBH, Race-Tour MBMRB0910K£18.54 £15.45The only air filter system you will ever need for your PHBH 26, 28, or 30mm carb. Triple layered micro air filter, easily cleanable and washable and re-usable. Only measures 38mm... Learn MoreYou'll need: 1 of these