Rebuild List: Rebuild List Bodywork Rubber - S1/2
-
Lambretta Air scoop rubber gasket, Grey, S1/2WMBL0367£4.88 £4.07This remade Italian rubber gasket fits between the frame and air scoop on Series 1 and 2 Lambretta scooters.... Learn MoreYou'll need: 1 of these
-
Lambretta Bridge piece rubber set, front and rear, Grey, S1/2WMBL0875£6.94 £5.78This set contains the 2 bridge piece rubbers to suit a series 1 or 2 Lambretta.... Learn MoreYou'll need: 1 of these
-
Lambretta Engine bump stop rubber, Viton, MBMBL0155£7.45 £6.21This rubber item sits in a hole on the top of your casing and supports your frame on your engine when the rear shocker is fuly compressed or removed. This version is made from Vit... Learn MoreYou'll need: 1 of these
-
Lambretta Floorboard fastener kit, for rubber/alloy strips, stainless steel, S1/2MBP0237K£32.95 £27.46This kit of fasteners will secure your floor strips to your legshields and then to you frame. It is for the 150cc models with the alloy channels that have the rubber inserts in ... Learn MoreYou'll need: 1 of these
-
Lambretta Cable, tube, gear and clutch, Grey, MBMBL0382£3.80 £3.17This piece of grey tube goes around the cables as they pass near the cylinder and choke cable assembly to protect them. This new improved MB design, positions cables better and cl... Learn MoreYou'll need: 1 of these
-
Lambretta Cable, tube, gear and clutch, Black, MBMBL0381£3.67 £3.06This piece of black tube goes around the cables as they pass near the cylinder and choke cable assembly to protect them. This new improved MB design, positions cables better and c... Learn MoreYou'll need: 1 of these
-
Lambretta Horn cast side and front mudguard rubber, S1/2, Grey set of 3WMBL0402£12.30 £10.25This set of rubbers are to fit down the side of a Series 1 or 2 horn cast and also between the horn cast and front mudguard. Made my Casa Lambretta... Learn MoreYou'll need: 1 of these
-
Lambretta Headset (handlebar) grips, standard, pair, Grey, S2, ItalianWMBL0867£12.74 £10.62A pair of remade Grey handlebar grips, fits all Series 1 and 2 Lambretta models.... Learn MoreYou'll need: 1 of these
-
Lambretta Kickstart pedal (lever) adjustable type, Grey rubber, S1/2, suits S1/2/3 engines/side covers, Race-Tour MBWMBL1333K£85.66 £71.38MB Race-Tour kickstart pedal (lever) with Grey rubber. Fits; Series 1 Series 2 Series 1/2 fitted with Series 3 engine or side casing Another first designed by MB - by alwa... Learn MoreYou'll need: 1 of these
-
Lambretta Kickstart pedal (lever) adjustable type, Black rubber, S1/2, suits S1/2/3 side covers, Race-Tour MBWMBL1332K£85.10 £70.92MB Race-Tour kickstart pedal (lever) with Black rubber. Fits; Series 1 Series 2 Series 1/2 fitted with Series 3 engine or side casing Another first designed by MB - by alw... Learn MoreYou'll need: 1 of these
-
Lambretta Legshield rubber beading, pair, Black, ItalianMBL1682PR£13.26 £11.05Italian made legshield rubber. Black for Gp Scooters but fits all Series 1, 2 and 3 Lambrettas.... Learn MoreYou'll need: 1 of these
-
Lambretta Legshield rubber beading, pair, Grey, ItalianMBL0407PR£13.26 £11.05This is a pair of high quality legshield beading for any Series 3, in grey.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer set (2 back, 2 bottom, 4 side rubbers) S1/2, MBWMBP0555K£16.32 £13.60Set of 8 tank rubber for your series 1 or 2 lambretta. Comprises 4 bottom and back rubbers that the tank sits on and 4 side rubbers. An MB product.... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, small, each, S1/2, MBWMBL1326£2.04 £1.70This a MB small petrol tank rubber buffer.Two are fitted on the side of the tank under the tank strap to space the tank strap away from the tank.This is the thinner Series 1/2 type... Learn MoreYou'll need: 1 of these
-
Lambretta Petrol (fuel) tank strap rubber buffer, large, each, S1/2, MBWMBL1327£2.04 £1.70This a MB large petrol tank rubber buffer.Two are fitted on the rear and lower of the tank and fit under the tank strap and is located in the frame to space the tank strap away fro... Learn MoreYou'll need: 1 of these
-
Lambretta Rear brake pedal rubber legshield seal, Black, MBMBP0612£3.40 £2.83Always thinking out of the box! Ever ridden your Lambretta in the rain - looked down and seen a dirty line coming from the brake pedal hole? You should have - they all do it! Th... Learn MoreYou'll need: 1 of these
-
Lambretta Rubber bodywork kit, Black, S1/2WMBL1335£49.78 £41.48This handy kit contains all the rubber trim needed when rebuilding a series 1 or 2 scooter. Although series 1 and 2 Lambrettas were never fitted with black rubber trim in the fact... Learn MoreYou'll need: 1 of these
-
Lambretta Rear brake pedal rubber, BlackMBL0412£5.16 £4.30This is a quality remade black rubber for your rear brake pedal.... Learn MoreYou'll need: 1 of these
-
Lambretta Rear brake pedal rubber, GreyMBL0413£5.16 £4.30This is a quality remade grey rubber for your rear brake pedal.... Learn MoreYou'll need: 1 of these
-
Lambretta Rubber gaskets for under 125 criss-cross channels, set 6, Grey, S1/2WMBL1014£23.94 £19.95This set of rubbers fit between the legshields and the alloy floor runners used on Series 1 and 2 125cc models.... Learn MoreYou'll need: 1 of these
-
Lambretta Rubber bodywork kit, Grey, S1/2WMBL0650£46.31 £38.59This handy kit contains all the rubber trim needed when rebuilding a series 1 or 2 scooter. All the items are grey unless specified. Handlebar grips - pair Side panel beading ... Learn MoreYou'll need: 1 of these
-
Lambretta Runner strip rubber inserts, set 6, Grey, S2WMBL0443£17.08 £14.23Runner strip Grey rubber inserts. Set of 6 for Series 2 Lambretta.... Learn MoreYou'll need: 1 of these
-
Lambretta Side panel rubber beading, pair, Grey, ItalianMBL0449PR£10.51 £8.76This is a pair of quality remade Italian grey side panel rubbers for Series 1/2 & 3 scooters.... Learn MoreYou'll need: 1 of these
-
Lambretta Side panel rubber beading, pair, Black, ItalianMBL0664PR£10.73 £8.94This is a pair of quality remade Italian black side panel rubbers for Series 1/2 & 3 scooters.... Learn MoreYou'll need: 1 of these
-
Lambretta Stand feet rubber, pair, Grey, ItalianMBL0900PR£10.08 £8.40These Italian stand feet rubbers are made from hard plastic to last a long time. These may be hard to fit, so use a hammer and line up the roll pins. Always use roll pins as it w... Learn MoreYou'll need: 1 of these
-
Lambretta Stand feet rubber, pair, Black, MBMBP0276PR£10.54 £8.78This is a pair of black stand feet. All Innocenti models had Black stand feet! This is a perfect reproduction part with a top quality finish, tough, yet grippy enough to kee... Learn MoreYou'll need: 1 of these
-
Lambretta Tool box rubber, Black, MBMBL0549£8.40 £7.00This rubber fits around the toolbox to cushion it as it rests on the frame. Another top product made for MB. Top tip, use a heat gun to fit it, in the corners put a thin slit and... Learn MoreYou'll need: 1 of these