Remade by MB this stainless steel air filter end plate fits all Series 3 air filter boxes. ... [more]

Standard black petrol tap lever.... [more]

Amongst many applications this fastener can specifically be used on: Lambretta petrol tap rod Lambretta rear brake pedal clamp assembly Lambretta headset throttle return spring    Note:... [more]

This is a high quality remade air hose for all 18 and 20mm SH type carburettors.   It can also be used on the modern... [more]

This is a high quality remade air hose for all 22mm SH type carburettors.   It can also be used on the modern PHBH type... [more]

MB Scooters petrol tap joint is used to connect the fuel tap with the lever. Made in stainless steel which is tougher and longer lasting.... [more]

It's a first! Nothing worse than looking inside the little hole of the fuel tank to try and gauge how much oil to put... [more]

This drip tray is as fitted to later Lambrettas to stop you getting oil and petrol everywhere when filling up the petrol tank.   A... [more]

This felt ring sits between the drip tray and the petrol tank.   It mops up any small spillages of oil and petrol.... [more]

This a small petrol tank rubber buffer.   Two are fitted on the side of the tank under the tank strap to space the... [more]

This buffer sits at the back of the tank on the frame arm.   Two are needed per scooter.   Series 3 Gp type... [more]

This is a quality Italian remade air scoop gasket for a Series 3.... [more]

This is a quality Italian remade air scoop gasket for a Series 3.... [more]

This rubber fits between the air filter elbow and the air box.... [more]

This rubber fits between the top of the air filter box and the frame.   Please note: This will not fit the BGM box... [more]

This is an Indian GP air box elbow.   Ideal if you are putting a scooter back to standard air box specification.   Will fit Series... [more]

Made for us to original designs this is an inlet gasket to suit all 200cc cast type (standard, factory 200, Rapido, Mugello) cylinders.... [more]

This specially made for MB gasket is fuel and heat resistant and suits all 125, 150 and 175 and 190/195 Lambretta cylinders where a... [more]

This is a MB remade polished stainless steel air hose clip. Fits the bottom of the air hose bellows rubber when using a standard 18/20mm... [more]

This is a MB remade stainless steel air hose clip for the top and bottom of the air hose on all 18/20mm standard carburettor... [more]

This sleeve fits over the choke lever assembly. Another MB product made from stainless steel.... [more]

This remade screw fits in the small bracket on your Lambretta frame and is used to secure the standard air box.    It is... [more]

This bolt is for Series 3 Lambrettas only.    It goes through the air box elbow and the filter and holds them to the air box... [more]

These are MB remade stainless steel tank straps.    Made from quality thick Stainless, these come finished off to a high brush standard finish. ... [more]

This a quality remade stainless steel tank strap trunnion.    It comprises of the two barrels and the threaded screw.    You need two... [more]

This is a complete Gp, Li series 1 637mm, Stainless steel petrol tank strap kit containing two tank straps and two tank strap trunnions. ... [more]

Excellent quality remade steel petrol tank that fits all Series 1, 2 and 3 Scooters.... [more]

Petrol tank rubber buffer set (kit)     2 back, 2 bottom, 4 side rubbers GP type     This is our MB BUDGET VERSION, these are classed... [more]

Lambretta Petrol tank strap threaded barrel, stainless steel, MB... [more]

Lambretta Petrol tank strap barrel, stainless steel, MB... [more]

Complete set of late type MB Series 3 petrol tank rubbers.    2 side, 2 lower and 4 blocks. ... [more]

Stainless steel MB Petrol tap lever adjuster sleeve.    Multi adjustable to cure limitations from standard fuel taps, petrol tanks and carb position.    Simply cut off the... [more]

MB Scooters Petrol tank strap kit to suit Series 1 type Lambrettas. Comes with; 2 tank straps, 637mm long, stainless steel, MB 2 screws/trunnions, short type, stainless... [more]

Petrol tank strap felt bands as fitted to Series 1 Scooters, but can be used or parts of them used on any petrol tank... [more]

New replacement Air Filter from MB Scooters for Series 3 Lambrettas, it uses fine wire mesh to filter the induction air.    It allows... [more]

MB stainlesss replacement choke lever to suit Series 3 chokes knobs steel or plastic.... [more]

This is MB's new petrol tank cap seal.    Specially made for us in Viton to resist the modern fuels we have to use.    It's a simple... [more]

High flow Series 3 air filter box kit.     Comes with     Modified air filter box for improved air flow ... [more]

Lambretta air bellows drain plug screw with nut and rubber pipe made in stainless steel and designed by Mark Broadhurst. If your motor suffers with... [more]