Parts index


We stock over 21 Engine casing related

These stainless steel parts are for the Lambretta engine casing. Many are not just stainless steel versions of a part, they may be improved in some way.


Showing parts 1 - 21 of 21

20   |  40   |  ALL   |

Sort by:


Lambretta Gear linkage tie bar, high tensile, zinc plated, MB
MBP0024

The original item was exposed to the elements and will rust in a short time.    Now redesigned and remade with a lighter version... [more]


£ 9.38£ 7.82 (Ex Vat)
Lambretta Gear linkage swivel pivot base, stainless steel, MB
MBP0026K

This is another part that we've looked at and said they go rusty and spoil a nice engine so we have remade these in... [more]


£ 15.77£ 13.14 (Ex Vat)
Lambretta Crankcase side level plug, stainless steel, MB
MBP0064

We were disappointed with the quality of the level plugs available so we made them in stainless steel. Idea on their own or in our... [more]


£ 10.31£ 8.59 (Ex Vat)
Lambretta Crankcase side drain plug, stainless steel, MB
MBP0069

We were disappointed with the quality of all the drain plugs available, so we made our own in stainless steel.    It is fitted with a... [more]


£ 11.59£ 9.66 (Ex Vat)
Lambretta Gear arm shim, 12mm, stainless steel, MB
MBP0072

This MB laser cut stainless steel 1mm shim can be used on the gear arm clutch arm brake cam and rear brake pedal.... [more]


£ 0.54£ 0.45 (Ex Vat)
Lambretta Engine clutch (arm) lever return spring, stainless steel, MB
MBP0079

A MB remade stainless steel clutch arm return spring.    They fit as per original but will not rust.... [more]


£ 2.45£ 2.04 (Ex Vat)
Lambretta Crankcase side filler (breather) cap, stainless steel, MB
MBP0082K

Our new MB Road - Race filler breather cap.    Made from stainless steel, designed by Mark Broadhust.    Comes with a length of... [more]


£ 14.10£ 11.75 (Ex Vat)
Lambretta Engine clutch (arm) lever, high tensile steel, zinc plated, standard type, MB
MBP0118

This is the lever that fits on your crankcase side and transmits the movement from your clutch cable through to the clutch.    We... [more]


£ 12.00£ 10.00 (Ex Vat)
Lambretta Gear linkage swivel, high tensile steel, zinc plated, MB
MBP0116

An MB precision gear swivel, made from high tensile steel with zinc plating making it look like an original item.  These precision items help gear... [more]


£ 13.46£ 11.22 (Ex Vat)
Lambretta Rear brake arm (lever) zinc plated, MB
MBP0117

This arm fits onto your rear brake cam and is pulled by the brake adjuster to engage your brakes.    It has been remade by us... [more]


£ 15.48£ 12.90 (Ex Vat)
Lambretta Gear linkage swivel shim for standard pivot bases, stainless steel, MB
MBP0128

This MB remade precision laser cut stainless steel shim fits on the gear pivot base on standard type gear pivot bases.    It is... [more]


£ 0.97£ 0.81 (Ex Vat)
Lambretta Crankcase side drain, level and filler (breather) cap, includes fibre washers (set) stainless steel, MB
MBP0084K

This popular MB product kit includes: Stainless steel level plug, MB Magnetic drain plug, MB Filler cap (with fuel pipe), MB Three fibre washers, MB TOP TIP: run the... [more]


£ 39.06£ 32.55 (Ex Vat)
Lambretta Crankcase side fastener kit, dome nuts, washers and studs, stainless steel
MBP0234K

This is a full set of stainless steel studs, with nuts made for MB Scooters Ltd 14 x 6mm crankcase side studs, MB 1 x 6mm... [more]


£ 23.53£ 19.61 (Ex Vat)
Lambretta Engine dowels, set of 3 oversizes 7.5mm, 8mm and 8-7mm, MB
MBL1700S

The casing for the Gearbox end plate dowels tend to get damaged quite easily especially if the nuts have come loose and the holes... [more]


£ 8.62£ 7.18 (Ex Vat)
Lambretta Kickstart cam, Li, Sx, Tv, MB
MBP0681

Lambretta Kickstart cam to suit Li, Sx, Tv crancase sides. More adjustmant and stronger. Designed by MB.... [more]


£ 9.60£ 8.00 (Ex Vat)
Lambretta Rear hub bearing plate, 0.5/0.7mm recess, stainless steel, MB
MBP0471K

This is a new MB designed Rear Hub bearing plate. 1 of 3 sizes.  Comes in stainless steel and has a recess on one side... [more]


£ 7.55£ 6.29 (Ex Vat)
Lambretta Engine Dowel, 2nd oversize, 8mm, MB
MBL1696

The casing for the Gearbox end plate dowels tend to get damaged quite easily especially if the nuts have come loose and the holes... [more]


£ 2.76£ 2.30 (Ex Vat)
Lambretta Engine bump stop washer, stainless steel, MB
MBP0274

MB Remade engine bump stop washer in stainless steel    No more rusted up washers that are hard to remove from the casing any more! ... [more]


£ 2.26£ 1.88 (Ex Vat)
Lambretta Gear box shim set 1.5 - 2.9mm, odds (9 shims) MB
MBP0345S

Top quality MB gear box shim set of odd sizes.    Comes with; 1.5, 1.7, 1.9, 2.1, 2.3, 2.5, 2.6, 2.7 and 2.90mm ... [more]


£ 28.94£ 24.12 (Ex Vat)
Lambretta Magneto housing flat sealing plate for large grommet, MB
MBP0370

Remade Stainless Steel mag housing sealing plate for the larger type mag housing sealing plate kit, MB ... [more]


£ 1.44£ 1.20 (Ex Vat)
Lambretta Magneto housing sealing pressed plate for large grommet, MB
MBP0371

Remade mag housing pressed sealing plate made from Stainless Steel for MB.  ... [more]


£ 2.51£ 2.09 (Ex Vat)