Lambretta Drive side sprocket spring, MB

MBL0492

This spring is part of the front sprocket set-up and is used to grip the sprocket in place.

Genuine springs can go weak over time and the sprocket can slip.

Early Series 1 springs are shorter and do not work well in modern motors, it's always worth fitting a new spring on a rebuild or a chain/sprocket change.

Another part made for MB after we were so disappointed with supplies from other sources. 


Lambretta Drive side sprocket spring, MB

£ 7.68
Price: £ 6.40 Ex Vat



Related Items (6)

Lambretta Drive side sprocket 15 tooth
MBL0484

This is a front sprocket with 15 teeth.    It is fitted as standard to all Series 1, 2 and 3 Lambrettas except the GP 200.If... [more]


£ 9.89£ 8.24 (Ex Vat)
Lambretta Drive side sliding dog, MB
MBL0137

This item fits with the front sprocket onto the sprocket sleeve. An MB made quality product.... [more]


£ 10.80£ 9.00 (Ex Vat)
Lambretta Drive side sprocket sleeve, MB
MBL0136

This is the part that fits on the drive side of your crank that your front sprocket fits onto. A quality MB made product.... [more]


£ 10.80£ 9.00 (Ex Vat)
Lambretta Drive side sprocket bolt, MB
MBP0163

We were tired of the poor quality two part Indian drive sprocket bolts so we had these made to original specification in high tensile... [more]


£ 13.60£ 11.33 (Ex Vat)
Lambretta Drive side sprocket spring cap (tapered) MB
MBL0491

This cap sits on top of the sprocket spring and is held in place by the drive sprocket bolt. This is made with a MB... [more]


£ 9.89£ 8.24 (Ex Vat)
Lambretta Drive side sprocket 18 tooth
MBL0487

This is a front sprocket with 18 teeth.    This was fitted as standard to all GP200 engines.    It is generally used with a 47 tooth rear... [more]


£ 11.12£ 9.27 (Ex Vat)


Reviews

there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Questions? ( 2 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Dave B on 21 Oct 2019 asked "Hi Can you tell me what the length of this spring is please?? The one I have taken off my Li150S measures 35.6mm and a spare one I had from Allsytles measures 37mm. When I put the latter on and torque up, it hits on the side casing!! Cheers Dave"

MB Scooters Ltd replied: New they should be 37mm, old ones go coil bound so measure smaller. If its hitting the side casing there is a problem with the cap fitting correctly

John on 22 Mar 2019 asked "Hi, do you have a tool which compresses this spring to allow unscrewing sprocket bolt? Thanks"

MB Scooters Ltd replied: There isn't a tool and you don't need one, just unscrew the bolt



If you feel something is not correct with this product description or image then please contact us using the same link