Lambretta Crankshaft, 60x110mm, Gp, full circle, bgm

MBGM0241
OEM: BGM11065

New quality crankshaft from bgm from September 2018. 

Full circle 60mm stroke, now comes with bgm manufactured con-rod, and using a bgm big end bearing and big end shims.

The crank is fully balanced to reduce engine vibration with tungsten weights.

Comes supplied with Yamaha small end bearing 16x20x20 for standard width pistons.

Bgm cylinder packer plates are also supplied with the crankshaft, 3.00mm for small block engines, and 3.00mm for large block engines

head gaskets also supplied for BGM 195 and 225 kits 1 for each kit at 1.50 mm



Lambretta Crankshaft, 60x110mm, Gp, full circle, bgm
  • Lambretta Crankshaft, 60x110mm, Gp, full circle, bgm
  • Lambretta Crankshaft, 60x110mm, Gp, full circle, bgm
  • Lambretta Crankshaft, 60x110mm, Gp, full circle, bgm

£ 291.06
Price: £ 242.55 Ex Vat



Temporarily out of stock

Notify Me

Related Items (11)

Lambretta Gasket, cylinder base packing (packer) plate, small block, 1.0mm, MB
MRB0600M10

A high quality MB laser cut aluminium packing plate for 150cc type casings.    It is 1.0mm thick.    Ideal for use with cranks with 110mm long con... [more]


£ 5.40£ 4.50 (Ex Vat)
Lambretta Gasket, cylinder base packing (packer) plate, small block, 1.5mm, MB
MRB0600M15

A high quality MB laser cut aluminium packing plate for 150cc type casings.    It is 1.5mm thick.    Ideal for use with cranks with 110mm long con... [more]


£ 6.00£ 5.00 (Ex Vat)
Lambretta Gasket, cylinder base packing (packer) plate, large block, 1.0mm, MB
MRB0136M10

A high quality MB laser cut aluminium packing plate for 200cc type casings.    It is 1mm thick.    Ideal for use with a 60mm stroke crank or... [more]


£ 5.40£ 4.50 (Ex Vat)
Lambretta Gasket, cylinder base packing (packer) plate, large block, 1.2mm, MB
MRB0136M12

A high quality MB laser cut aluminium packing plate for 200cc type casings.    It is 1.2mm thick.    Ideal for use with a 60mm stroke crank or... [more]


£ 5.40£ 4.50 (Ex Vat)
Lambretta Gasket, cylinder base packing (packer) plate, large block, 1.5mm, MB
MRB0136M15

A high quality MB laser cut aluminium packing plate for 200cc type casings.    It is 1.5mm thick.    Ideal for use with a 60mm stroke crank or... [more]


£ 6.00£ 5.00 (Ex Vat)
Lambretta Crankshaft, 58x110mm, Gp, full circle, bgm
MBGM0252

New quality crankshaft from bgm.     Full circle 58mm stroke with Yamaha 110mm con-rod fitted.    The crank is fully balanced to reduce... [more]


£ 291.06£ 242.55 (Ex Vat)
Lambretta Tool, crankshaft extractor, MB
MRB0839K

We see a lot of damaged cranks where people have hit them with hammers to free them from the drive bearing.    Here is a... [more]


£ 49.72£ 41.43 (Ex Vat)
Lambretta Tool, drive sprocket sleeve, extracting (puller) MB
MBP0272

Drive Sprocket Sleeve removing pulling tool.    Another MB product of an exact copy of an Innocenti item.    A very handy tool for drive sprocket sleeves that... [more]


£ 18.00£ 15.00 (Ex Vat)
Lambretta Tool, crankshaft drive side pulling sleeve, MB
MRB0201

There is no point spending money on a crank that has been checked for alignment then going and hitting it with a hammer to... [more]


£ 19.20£ 16.00 (Ex Vat)
Lambretta Bearing kit (set) crankshaft, Gp 200, bearings, seals, gaskets, screws and drive plate, Race-Tour, MB
MBP0236K

This kit contains all the parts you would need when changing your crank to any Gp200 type crankshaft.     All parts are made... [more]


£ 91.80£ 76.50 (Ex Vat)


Reviews ( 1 )

 

5 star 1. Warren m 30 Nov 2017 

quality looking crank

 
want to offer a review?
Click here

Questions? ( 11 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Shane on 25 Dec 2018 asked "Hi Mark, Does the crankcase mouth need modification for the new type rod compared too the old yam rod. Regards Shane"

MB Scooters Ltd replied: No mods required the rod has been machined down

Gary on 08 Jan 2018 asked "hi i want to use this crank with a Ts1-225 & to keep as std port timings. what size cylinder packer is needed please? "

MB Scooters Ltd replied: Port timings will alter with the longer stroke crankshaft. Packers depend on where you want the port timings and depends on the height of the casing. Usually we use 1.5 - 3mm packers

Kev E on 19 Dec 2017 asked "I run BGM cranks in both my TS1s. Just about to build a standard RB250 2016 mono port and plan to use BGM 60/110 crank , will it handle the increased power. "

MB Scooters Ltd replied: Yes should be fine

Christian on 24 Aug 2016 asked "Planning on doing a race tour kit with this crank. Could I substitute the two 3mm shims that come with this crank for two other sizes for a 200 case and if so how would I go about that? Thank you, Christian"

MB Scooters Ltd replied: Yes you could phone the shop to organise it

Christian on 16 Aug 2016 asked "What size packingplat3s come with this crank? Thanks."

MB Scooters Ltd replied: 3mm small and large block

Matt D on 15 Jan 2016 asked "Hi, Can you please tell me if this crank will fit without the big end catching the casings ?"

MB Scooters Ltd replied: Yes it should do on most casings, I've not come across one that needs altering but have been told some casings do need altering

Matt on 08 Jan 2016 asked "Hi, can you please tell me if the cases need modifying to avoid the big end catching with this crank? "

MB Scooters Ltd replied: I've never had to modify a casing using them, but have heard one person doing it

N.brenner on 15 Jul 2015 asked "When you build up the bgm crank the standard small end bearing 20 m/m width into the conrod the needle roller ends show each side of the conrod eye! is this to have needle rollers the full width of the small-end eye or for lubrication straight into the open end of the bearing? it just looks alittle strange "

MB Scooters Ltd replied: This is how Yamaha do them, used them for 30 years with no issues. Will be fine.

Peter M on 23 Jan 2015 asked "What is the purpose of the shims that come with the crankshaft?"

MB Scooters Ltd replied: In case the drive plate is high and crank rubs on the plate. Or just fit the MB drive plate and have done with it

Paul d on 30 May 2013 asked "hi are the bearing shims and magneto gaskets available seperately?"

MB Scooters Ltd replied: Yes all in the web shop

Mike M on 02 Jun 2012 asked "I bought this crank from jet 200 here in the states. they lost the instructions wondering if you had a copy of them. you could scan and email to me. if not cheers"

MB Scooters Ltd replied: Look here http://www.lambrettaspares.com/info/lambretta-setting-up-instructions-/bgm-product-fitting-instructions+155.html



If you feel something is not correct with this product description or image then please contact us using the same link