Lambretta Engine Dowels, gearbox/crankcase side, set of 3 oversizes 7.5mm, 8mm and 8-7mm, MB

The casing for the Gearbox end plate dowels tend to get damaged quite easily especially if the nuts have come loose and the holes get enlarged a bit.

This is a set of one of each 7.5mm first oversized, 8mm second oversized and stepped 8/7mm oversized dowels to repair a casing around the end plate.

These are also slightly longer to find more alloy if some parts have chipped away.

If this has happened and the standard 7mm holes are slightly loose - fit the end plate tight with no dowels fitted, drill a 7.5mm hole through the end plate into the casing for these first oversized 7.5mm dowels to fit.

Tap the dowels in and once fitted center punch the end plate to stop the dowels coming out.

Do the same for the second oversized 8mm version.

With the stepped 8/7mm dowel, drill the casing 8mm, that way you keep the end plate standard 7mm.