Lambretta Thread repair insert 4-6 x 7mm, Steel, MB
£3.37
£2.81
In stock
SKU
MBP0665
Thread insert 4-6 x 7mm, MB Steel (mag housing, S1/2 horncasting, headset bottom)
Thread repair insert specially designed and made for MB Scooters for the home repairer.
Can repair threads that have pulled out where normal insert repairs do not cut clean threads.
- 6 x 1mm outside diameter
- 4 x 0.7mm inside diameter
- 7mm long
- Zinc plated
Can be used as a universal repair insert or especially works on
- Lambretta Series 1/2/3 headset 4mm holes
- Lambretta mag housing plate holes
Requires 6mm tapping tool MBU0915.
Write Your Own Review
Basic repair is like this.
- Drill out to 4.8 - 5mm
- Tap threads to 6 x 1mm
- Use a 6mm screw with plain nut, screw the insert onto the screw, lock the nut gently
- Cover the threaded screw with a strong loctite and screw the insert in with the screw untill it locks, unwind the nut and remove the screw
- You can counter bore the casting so the top hat seats flush if you need to
Related Products
