Parts index


We stock over 26 Kickstart spares

This section contains all the kickstart spares we offer.


Showing parts 1 - 26 of 26

20   |  40   |  ALL   |

Sort by:


Kickstart piston (plunger) MB
MBP0177

Remade and re-designed by Mark Broadhurst.    Made in the UK using modern materials and heat treatment.    Another improved MB Product.   ... [more]


£ 30.58£ 25.48 (Ex Vat)
Kickstart stop plastic bush
MBL1423

Later type Indian side casings use a different kickstart stop.    It uses a smaller allen cap head screw compared to other makes because of this... [more]


£ 1.76£ 1.47 (Ex Vat)
Seal, kickstart
MBB0061

A high quality kick-start seal, fits all Series 1, 2 and 3 models.... [more]


£ 1.96£ 1.63 (Ex Vat)
Screw, Hexagon set, 7 x 40mm, stainless steel, MB
MBFH7X40

Amongst many applications this fastener can specifically be used to secure the kick-start lever to the shaft.... [more]


£ 2.70£ 2.25 (Ex Vat)
Circlip, 18mm internal, for kick-start shaft
MBFINT18SC

This circlip fits inside the kick-start shaft and secures the disc that holds the spring and piston in place.... [more]


£ 0.28£ 0.23 (Ex Vat)
Kickstart piston, (plunger) SIL
MBL0280

This piston sits inside the kick-start shaft and is pushed out to engage your first gear.    They do wear out and if the teeth are... [more]


£ 15.46£ 12.88 (Ex Vat)
Kickstart piston inner disc washer
MBL0281

This washer sits inside the kick-start shaft, held in by a circlip, and it holds the spring in place.... [more]


£ 0.77£ 0.64 (Ex Vat)
Kickstart piston locating side peg
MBL0282

This peg screws into the side of your kick-start piston and is engaged by the mechanism that pushes the piston out.   It is... [more]


£ 1.98£ 1.65 (Ex Vat)
Kickstart return spring, large
MBL0283

This spring fits into your crankcase side and makes your kick-start pedal spring back up.... [more]


£ 6.32£ 5.27 (Ex Vat)
Kickstart piston spring, small
MBL0284

This spring fits inside your kick-start shaft and pushes the piston out.   Always fit a new strong spring, it helps kick-starts slipping.... [more]


£ 1.20£ 1.00 (Ex Vat)
Kickstart shaft, Gp, SIL
MBL0285

This is a GP kick-start shaft and fits all later crankcase sides.   It can be fitted to Li, Sx, Tv engines as an... [more]


£ 42.56£ 35.47 (Ex Vat)
Rubber, kickstart, Black, Series 3, MB
MBP0176

This is a quality kick-start rubber, in black.    It is made of quite hard plastic so will last better than a rubber version.    To fit it,... [more]


£ 5.52£ 4.60 (Ex Vat)
Kickstart bushes, pair
MBL0543PR

This is a set of kick-start bushes for a GP type crankcase side.... [more]


£ 7.15£ 5.96 (Ex Vat)
Kickstart pedal (lever) Series 3
MBL0569

This is a remade kick-start lever for all Series 3 Lambrettas.    Note we also offer the SX200 type lever which is longer and can make... [more]


£ 35.28£ 29.40 (Ex Vat)
Rubber, kickstart, Grey, Series 3
MBL0660IT

This is a quality kick-start rubber, in grey.    It is made of hard plastic so will last better than rubber types.    Drop in boiled water for... [more]


£ 6.12£ 5.10 (Ex Vat)
Kickstart stop allen cap head screw
MBL0754

This special allen screw fits into the crankcase side and stops the kick-start shaft in its start position.... [more]


£ 1.57£ 1.31 (Ex Vat)
Kickstart outer bush, small
MBL0902

This bush fits into the crankcase side and your kick-start goes through it, worth changing when you overhaul your engine or if you are... [more]


£ 3.58£ 2.98 (Ex Vat)
Kickstart pedal (lever) Series 2
MBL0958

This is a remade kick-start to suit all Series 1 Li models and all Series 2 Lambrettas.    It is chrome plated.    These pedals require an M8... [more]


£ 35.28£ 29.40 (Ex Vat)
Shim, kickstart washer, 1.0mm, stainless steel, MB
MBP0045

We remade the kick-start washers in two thicknesses to make it easier to shim up the kick-start shaft with the right thickness washer.    We have... [more]


£ 1.76£ 1.47 (Ex Vat)
Shim, kickstart washer, 1.5mm, stainless steel, MB
MBP0046

We remade the kick-start washers in two thicknesses to make it easier to shim up the kick-start shaft with the right thickness washer.    We have... [more]


£ 1.76£ 1.47 (Ex Vat)
Kickstart shaft kit, Gp, includes shaft, springs, piston, peg, disc, seal shims and circlips
MBL1318K

Complete Gp kick start shaft kit which includes:  Shaft-  genuine SIL Springs- large and small ... [more]


£ 89.45£ 74.54 (Ex Vat)
Screw, allen cap head, 10 x 20mm, kickstart stop, needs MBL1423
MBFAC10X20SC

This is the Indian version of the kick start stop screw, which works with the plastic SIL cover. ... [more]


£ 1.25£ 1.04 (Ex Vat)
Circlip, 20 x 1.2mm external, for kickstart shaft with load spreading lugs, self coloured
MBFEXT20SCL

Kickstart outer circlip in self colour.    This circlip uses extra tags which spread the load around the outer washer.    This is a big improvement as it... [more]


£ 0.74£ 0.62 (Ex Vat)
Kickstart piston locating side reference pin (peg, screw) MB
MBP0355

Specially made for MB this new kick start reference pin helps spread the kickstart load and is easier to tighten now by an allen... [more]


£ 1.51£ 1.26 (Ex Vat)
Kickstart Pedal (LEVER S3) Indian
MBL1608

Universal Series 3 type kick start lever.    Indian origin but perfectly fine. ... [more]


£ 27.19£ 22.66 (Ex Vat)