aaTravelrite travel accessories(697)
 Autumn/Winter sale 2010(12)
 BGM parts(69)
 BMW spares(1)
 Books, technical and DVDs(13)
 Carburation(391)
 Chromed items(4)
 Gift ideas(196)
 Labour prices(89)
 Lambretta spares(1749)
 Budget Indian parts(12)
 Control cables(79)
 Fastener kits(25)
 Lambretta electrical spares(81)
 Lambretta engine spares(756)
 Lambretta frame spares(683)
 Badges(185)
 Bodywork(99)
 Cast and alloy products(12)
 Custom parts(19)
 Forks(55)
 Frame fastener kits(10)
 Frame tools(7)
 Frame work(52)
 Front hub and wheel related.(60)
 Front hub fasteners(17)
 Headset spares(91)
 Rubber and plastic trim(74)
 Seats(5)
 Stands(14)
 Lambretta tools(41)
 Series 1 & 2 spares(67)
 Spanish Lambretta spares(3)
 Lower prices(0)
 Metric fasteners(214)
 MRB products(242)
 Stainless steel products(119)
 trailtech(34)
 Universal spares(328)
 Universal tools(29)
 Vespa spares(33)

PARTS INDEX
We stock over 60 Front hub and wheel related.

This is our section of spares for front hubs - both disc and drum type. It includes all the special remade/stainless parts we offer.

Front hub and wheel related.: Please Select one of these Categories
1. Front Hub Fasteners 17 Parts
Here is where you will find all the fasteners required for a Lambretta front hub.
Front hub fasteners

 Change Category 
Pages: back   1   next
 Displaying 43 records 1 - 43 out of (43) records per page: 5 10 15 ALL
1. Inboard Disk Brake Backplate, Just The Backplate, Remade
Remade in Vietnam this is a new inboard disc backplate painted in white. ...
   
Front hub and wheel related.
  
Temporarily out of stock
Check back later
2. Front Hub Bearing, 2 Required
A high quality front hub bearing to suit all Series 1, 2 and 3 front hubs.    Don't forget you need two...
 
£ 6.02
( Ex Vat: £ 5.02 )
  
Front hub and wheel related.
  
Add :
3. Front Hub Seal, 2 Required
A high quality front hub seal, fits all Series 1, 2 and 3 models.    You need two per hub....
   
Front hub and wheel related.
  
Add :
4. Front Hub Drum Back Plate Speedo Seal
This is the seal that fits inside your front hub to keep the grease from your speedo drive away from...
   
Front hub and wheel related.
  
Add :
5. Disc Locating Stud Stainless Steel MBD
This is a remade stainless disc locating stud.    It is fitted to the standard Lambretta disc hub backplate.    12 x 20 -...
   
Front hub and wheel related.
  
Add :
6. Rear Brake Shoe Pivot Pin, Gp, 2 Required
This item screws into your engine casing and your brake shoes pivot on it.    You need two per casing.    Gp type pivot...
   
Front hub and wheel related.
  
Add :
7. Brake Shoes, Li, Sx, Tv
This is a pair of high quality, European brake shoes.    It fits all brake drums, front or back.    Li, Sx...
   
Front hub and wheel related.
  
Add :
8. Brake Shoes, Gp
This is a pair of high quality, European brake shoes.    They fit all brake drums, front or back.    They will only work...
   
Front hub and wheel related.
  
Add :
9. Brake Shoe Return Spring
This spring holds your brake shoes together and makes them spring back so your brakes don't stay on!...
   
Front hub and wheel related.
  
Add :
10. Brake Shoe W Spring Clip, Gp
This W clip holds the brake shoes in place on GP type brake pivots.    Do not use it on Li, Sx,...
   
Front hub and wheel related.
  
Add :
11. Disc I Cap, Zinc Plated
This cap sits over the arm assembly on a standard Lambretta disc hub....
   
Front hub and wheel related.
  
Add :
12. Disc Pads
This is a set of high quality European made pads for a Lambretta disc hub....
   
Front hub and wheel related.
  
Add :
13. Disc Windows Standard White
This is a set of plastic windows to fit the hub of a standard Lambretta disc assembly....
   
Front hub and wheel related.
  
Add :
14. Speedo Worm And Drive Set Plastic
This two part set contains a matched pair of a speedo ring and worm.  They are both plastic....
   
Front hub and wheel related.
  
Temporarily out of stock
Check back later
15. Wheel Rims Wide Width, Plain Paint, 1 Set
This is a pair (one wheel) of wide wheel rims, for any Series 1, 2 or 3 Lambretta.  We only recommend...
   
Front hub and wheel related.
  
Add :
16. Hub Stud, Standard Screw In Type, Self Colured
This hub stud is fitted to all original Lambretta hubs but not all after market hubs which could be press...
   
Front hub and wheel related.
  
Add :
17. Brake Shoe Spring Plate, Li, Sx, Tv, Self Coloured
This plate sits on top of the two brake shoe pivots and is held in place by two circlips.  Li, Sx,...
   
Front hub and wheel related.
  
Add :
18. Front Hub Drum, Gp, No Studs, Plain Paint
This is an Indian front hub (just the half that the wheel bolts to).    It does not have the 4 studs...
   
Front hub and wheel related.
  
Temporarily out of stock
Check back later
19. Front Hub Drum Spindle, INDIAN
This is a  spindle for drum hubs only.    It does not have the shoulder towards one end like the disc spindles...
 
£ 14.86
( Ex Vat: £ 12.38 )
  
Front hub and wheel related.
  
Add :
20. Front Hub Inner Seal Top Hat Bush, Zinc Plated, MRB
This is our MRB remade top hat bush for inside a disc hub which comes zinc plated....
 
£ 3.76
( Ex Vat: £ 3.13 )
  
Front hub and wheel related.
  
Add :
21. Front Hub Seal Outer Top Hat Bush, Stainless Steel, MRB
This is our MRB remade top hat bush for the outside a disc hub and can also be used on...
 
£ 9.56
( Ex Vat: £ 7.97 )
  
Front hub and wheel related.
  
Add :
22. Front Hub Spindle, Disc Type, MRB
This is a high quality remade disc spindle, made from high tensile steel.    It has the little shoulder which differentiates it...
 
£ 18.34
( Ex Vat: £ 15.28 )
  
Front hub and wheel related.
  
Add :
23. Disc Static Pad Tab Washer, Zinc Plated Plated, MRB
This is a quality laser cut re-made tab washer to secure the nut that adjusts the static brake pad in...
   
Front hub and wheel related.
  
Add :
24. Disc Static Pad Tab Washer Grub Screw Stainless Steel
This is a remade high tensile grub screw for adjusting the static disc pad...
   
Front hub and wheel related.
  
Add :
25. Front Hub Bearing Spacer Tube
This is a remade hub distance spacer.    It fits inside the hub and is used to keep the two bearings the...
   
Front hub and wheel related.
  
Add :
26. Front Brake Cable Top Hat Bush, Stainless Steel, MRB
This is a MRB remade stainless steel front brake top hat.    It has the notch in it to allow for removing the...
 
£ 3.82
( Ex Vat: £ 3.18 )
  
Front hub and wheel related.
  
Temporarily out of stock
Check back later
27. Speedo Drive Two Pieces, Worm And Drive, Remade Metal, MRB
We were all getting sick of using the plastic speedo drives as they rarely lasted.    Original steel ones are very hard...
 
£ 27.52
( Ex Vat: £ 22.93 )
  
Front hub and wheel related.
  
Add :
28. Speedo Drive Outer Screw, Stainless Steel, MRB
The original brass version of this item has long been unavailable and the only alternative were the Indian plastic versions...
 
£ 14.34
( Ex Vat: £ 11.95 )
  
Front hub and wheel related.
  
Add :
29. Disc Static Pad Tab Washer Grub Screw Nut Stainless Steel
Amongst many applications this fastener can specifically be used on the grub screw that adjusts the pads on a standard...
   
Front hub and wheel related.
  
Add :
30. Disc Windows, Custom Chrome Plated
This is a set of chrome plastic windows to fit the hub of a standard Lambretta disc assembly....
   
Front hub and wheel related.
  
Add :
31. Front Hub Brake Arm Shim, Stainless Steel, MRB
This MRB remade precision laser cut stainless steel shim fits on drum type hubs, between the hub and the front...
 
£ 0.83
( Ex Vat: £ 0.69 )
  
Front hub and wheel related.
  
Add :
32. Brake Shoe Plate, Li, Sx, Tv Stainless Steel, MRB
This MRB plate sits on top of the two brake shoe pivots and is held in place by two circlips.    Li,...
 
£ 2.10
( Ex Vat: £ 1.75 )
  
Front hub and wheel related.
  
Add :
33. Wheel Rim Fastener Kit, Original Looking Nylon And Dome Nuts, Per Wheel, Stainless Steel
This popular kit has sufficient fasteners to do one wheel rim, using nyloc nuts with white inserts (as per original)...
 
£ 7.97
( Ex Vat: £ 6.64 )
  
Front hub and wheel related.
  
Add :
34. Front Brake Arm, MRB
This arm is fitted to drum hubs and turns the brake cam.    It is cast from high strength rust resistant steel...
 
£ 34.61
( Ex Vat: £ 28.84 )
  
Front hub and wheel related.
  
Add :
35. 12 X 1.50mm Half Nut For Hub Spindle Zinc Plated
This is used on the fork link bolt it is zinc plated....
   
Front hub and wheel related.
  
Add :
36. Wheel Rims, Pair, Stanard Width
Lambretta steel wide rims in standard width painted grey. ...
   
Front hub and wheel related.
  
Temporarily out of stock
Check back later
37. Set Of 4 Screw In Hub Studs
These screw in hub studs suit original type hubs with the larger thread been left hand.  They are used on both...
   
Front hub and wheel related.
  
Add :
38. Set Of 4 Press In Hub Studs, MRB
These are special high tensile press in wheel studs to suit the latter type Italian hubs. Easy to knock out and...
   
Front hub and wheel related.
  
Temporarily out of stock
Check back later
39. Hub Stud, MRB.
U.K. Made MRB Lambretta Hub Stud, Made From High Tensile Steel, Zinc Plated, For Use on Front Or Rear Lambretta...
 
£ 3.48
( Ex Vat: £ 2.90 )
  
Front hub and wheel related.
  
Add :
40. Lambretta Wheel Rim, Tubeless Alloy, Matt Black, SIP.
...
 
£ 61.84
( Ex Vat: £ 51.53 )
  
Front hub and wheel related.
  
Temporarily out of stock
Check back later
41. Lambretta Wheel Rim, Tubeless Alloy Silver, SIP.
...
 
£ 61.84
( Ex Vat: £ 51.53 )
  
Front hub and wheel related.
  
Temporarily out of stock
Check back later
42. Lambretta Wheel Rim, Tubeless Polished Alloy, SIP.
...
 
£ 61.84
( Ex Vat: £ 51.53 )
  
Front hub and wheel related.
  
Add :
43. Lambretta Rim Tubeless, SIP Black With Polished Lip
...
 
£ 64.26
( Ex Vat: £ 53.55 )
  
Front hub and wheel related.
  
Temporarily out of stock
Check back later