Lambretta Magneto housing, UNI

MBL0304

Lambretta UNI Series 1, 2, 3 magneto housing.

The castings are of good quality and finish.

They can be used on any Series 2 or 3 scooter and can also be fitted to a Series 1 as an upgrade.

We can ultra sonic clean these or bead blast them to match an engine casing done the same way ready for your rebuild.

We can also rebuild the bearings and seals for you if required with MB products: LAB132



Lambretta Magneto housing, UNI

£ 59.95
Price: £ 49.96 Ex Vat



Related Items (5)

Lambretta Magneto housing retaining L shape spacer, stainless steel, MB
MBL0305

This L shaped washer sits inside your magneto housing and holds one of the oil seals in place.... [more]


£ 2.34£ 1.95 (Ex Vat)
Lambretta Stud 6x25mm - 10x5x10mm, magneto housing, stainless steel, MB
MBFST6X25SS

This remade stainless steel stud is designed to be used to secure the magneto housing to the engine casing.    It can also be used with... [more]


£ 0.78£ 0.65 (Ex Vat)
Lambretta Circlip 52mm internal, magneto housings
MBFINT52SC

Amongst many applications this fastener can specifically be used to secure the large magneto seal into the Lambretta magneto housing.... [more]


£ 1.02£ 0.85 (Ex Vat)
Lambretta Bearing, flywheel, Li, Sx, Tv, Gp 125, 150, 175, branded name
MBB0009

A high quality flywheel bearing to suit all non-GP200 crankshafts.    It fits Li, Sx, Tv crankshafts. Also fits Vespa T5 flywheels.... [more]


£ 22.80£ 19.00 (Ex Vat)
Lambretta Bearing, flywheel, Gp200, branded name
MBB0010

A high quality, high load flywheel bearing to suit all GP200 crankshafts, road or race.    Please note our bearings will be either FAG... [more]


£ 33.60£ 28.00 (Ex Vat)


Reviews

there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Questions? ( 5 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Robert F on 08 Jul 2022 asked "Hi Currently considering upgrading to a GP200 crank and BGM or SIP electronics. Will my current Mag Housing be OK. (Series 3 Li 150 (Spanish). Little concerned about your comments on Mag Housing may need machining. Thanks"

MB Scooters Ltd replied: Yes your mag housing is fine for this set up

John on 31 Aug 2020 asked "Hi, is this UNI or SIL ? Thanks"

MB Scooters Ltd replied: These are SIL Mag housings

N b on 04 Nov 2015 asked "When you supply a Mag case will it be skimmed for use or are the Indian Mag cases OK"

MB Scooters Ltd replied: Ready to fit no problems

Sebastien M on 28 Jun 2008 asked "I have a question about "Magneto housing plain" : Hello MRB Does it need to be trimmed to work with BGM stators and AF light flywheel ?"

MB Scooters Ltd replied: All mag housings should be trimmed to suit the BGM and AF flywheel.



The fault lies within the flywheels design, it was exactly the same with the Italian versions from the 1980's.



If you use the MRB Race-Tour crankshaft you may not need to machine the flywheel as the crankpin is 05mm wider and spacers the flywheel away from the stator.

Our cranks come with a thicker mag housing gasket to allow for the wider crankpin, ideally the inner mag housing face needs 05 - 10mm machining off to allow the crank to fit perfect if fitting the AF flywheel.

We do not sell the AF flywheels for the problems that come with them.

Peter R on 22 Jun 2008 asked "Is this for 150's or 200's."

MB Scooters Ltd replied: Hi these fit both models



If you feel something is not correct with this product description or image then please contact us using the same link