Lambretta Headset (handlebar) pulley (wheel, roller) Quick action gear, Gp, Li, Sx, Tv, Brass, MB


Another innovation from Mark Broadhurst - for years Mark has made one off larger quick action pulleys for his own bikes.

This stops the clutch and arm being pulled into the air for 1st gear and wrapping your arm around in 4th.

The large wheel means you can have less movement between each gear selection, making gear selection much easier.

Made in Brass to gain weight in the headset and adds to all the other precision made heavy bushes and rods to help reduce vibration in the headset area.

It also stops slop from using roll pins in plastic bushes.

These use 5mm roll pins as per the stronger Indian plastic rollers, if you have an Italian rod with a 4mm hole then it needs drilling to 5mm. 

These now also come with 4 x 4mm allen screws so you can tighten the roller to splined type Li, Sx, Tv control rods and you dont then use the roll pin.

Lambretta Headset (handlebar) pulley (wheel, roller) Quick action gear, Gp, Li, Sx, Tv, Brass, MB

£ 26.40
Price: £ 22.00 Ex Vat

Related Items (7)

Lambretta Headset (handlebar) rod (hole in-hole out) Gp, late Sx Special, Tv, uses 5mm roll pin, stainless steel, MB

This is a handlebar rod for late Sx and all GP scooters, ones that use roll pins to hold the rollers in place.   ... [more]

£ 16.74£ 13.95 (Ex Vat)
Lambretta Headset (handlebar) bush, olive, for throttle and gear rod, Brass (saddle clamp support) MB

Remade in Brass like the old days, harder wearing and heavier helping to reduce the headset vibration along with our other MB headset heavy... [more]

£ 3.95£ 3.29 (Ex Vat)
Lambretta Headset (handlebar) bush, outer, Brass, Series 3, (taps into both ends of handlebars) MB

Made for MB, Brass heavy weight handlebar outer end bush to help reduce vibration in headsets.... [more]

£ 5.46£ 4.55 (Ex Vat)
Lambretta Headset (handlebar) bush, throttle and gear rod (for 5mm roll pin) Gp late Sx, Special, Tv, Brass, MB

This is our heavy weight Brass handlebar bush for the GP type throttle/gear rods using a 5mm roll pin.    These reduce weight and... [more]

£ 7.90£ 6.58 (Ex Vat)
Lambretta Headset (handlebar) rod roll pin 5x26mm, for MB/Indian control rods, self colour

Amongst many applications this fastener can specifically be used to secure the end bushes on Indian Lambretta handlebar shafts and on Li, SX, TV... [more]

£ 0.78£ 0.65 (Ex Vat)
Lambretta Headset (handlebar) clutch lever gear housing brass inner bush, Series 3, MB

Precision gear change bush made in brass by MB, this fits into the Series 3 clutch housing.     It also adds weigh into... [more]

£ 6.60£ 5.50 (Ex Vat)
Lambretta Headset (handlebar) bush, olive support, for throttle and gear rod, stainless steel, MB

MB Stainless steel throttle and gear roller olive bush support. Fits all Series 1, 2, 3.... [more]

£ 2.95£ 2.46 (Ex Vat)


With some headsets and speedo's it maybe possible that the gear roller will touch.

Carefully grind the area where the wheel touches the speedo to make sure it spins free.

Reviews ( 8 )


5 star 1. Steve 31 Mar 2018 

Awesome, as always


5 star 2. Steve B 06 Aug 2015 

Quality item fast service as usual !!


5 star 3. Richard B 13 Jul 2014 

Great piece of kit and easy to fit. Transforms gear changing and recommended purchase


5 star 4. Gordon E 04 Apr 2020 

Great item, works really with the MB Gear Cables! You get a beautiful silky smooth operation and you don't need to bend your wrist as much!! Recommended


5 star 5. Wings 21 Aug 2021 

Stunning bit of kit and fits a treat. Now that it fits all rods, makes this an obligatory addition as part of any "˜updating' your drive system.


5 star 6. Ben F 06 Nov 2021 

Great fit high quality properly engineered


5 star 7. Peter 22 Apr 2022 

Solid and part has significant weight. 10 minutes to fit Gear change travel as stated in description reduced, good if your getting decrepit.


5 star 8. Peter s 12 Oct 2023 

appears well engineered

want to offer a review?
Click here

Questions? ( 8 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!

Chris on 07 May 2023 asked "Im having problems with the pin coming free from the roller on my jet 200 does this use a pin and grub screw of just the screws. Do the screw need a pilot hole"

MB Scooters Ltd replied: Old pins do this. Our roller uses a 5mm pin so your rod needs drilling out and also it comes with grub screws as well

Stephen L on 01 Dec 2022 asked "Do the grub screws give sufficient grip on a splined rod, or would it be better to drill it and use a pin?"

MB Scooters Ltd replied: Yes they do if you're careful tightening them up

Dean W on 17 Jan 2021 asked "Hi Mark, Once this is fitted does this align with the numbers on the gear change."

MB Scooters Ltd replied: They will be out, but you should know what gear you are in anyway

Alonso P on 24 May 2020 asked "Can you tell me how wide this is? I have a non-original one on mine that doesn't line the cables up nicely so it needs replacing. "

MB Scooters Ltd replied: 20.4mm wide

Tommy N on 26 Feb 2020 asked "Will this be okay to use with 5 speed gearbox!"

MB Scooters Ltd replied: Perfect all we use

Hank U on 18 Oct 2015 asked "Stupid question and I think mechanically I know the answer, but just wanted to confirm: With the bigger wheel, as the gear selector is rotated and each subsequent gear is engaged, will the numbers on the perch now not be lined up with the respective gear? Cheers!"

MB Scooters Ltd replied: They wont be far out

Marek ( on 25 Jul 2015 asked "Would this and the quick action throttle fit a serveta jet200? Or just the gas. Thanks in advance Mav"

MB Scooters Ltd replied: It will if it's a rod and pin type of roller

Peter M on 21 Jan 2015 asked "Can this be modified or splined to suit an early splined control rod?"

MB Scooters Ltd replied: sorry no but you could convert the rods and bushes to MB GP types

If you feel something is not correct with this product description or image then please contact us using the same link