Lambretta Tool, Rear hub bearing fitting and removing, MB

MRB0967

Theres plenty of ways to fit and remove a bearing, it's the same with a rear hub bearing.

On a good casing if warmed enough a bearing will drop or knock out and again if warm enough a bearing will drop in or with a little help from a well designed drift like our MRB0866.

But after years of rebuilding engines and repairing casings - occasionally you need a bit more than heat and a drift as the rear hub area is weak and can be broken or a bearing can be fitted to one side damaging the casing.

This bearing tool is the perfect answer to avoiding problems on any rebuild.

Fit one way and the tool easily pushes out the bearing and theres no need to remove the 4 studs.

Turn the sleeves around and the bearing can be safely pulled into the casing.

A must for anyone building engines.

Alway use a bit of heat to help stuborn ones.

Designed by Mark Broadhurst.



Lambretta Tool, Rear hub bearing fitting and removing, MB
  • Lambretta Tool, Rear hub bearing fitting and removing, MB
  • Lambretta Tool, Rear hub bearing fitting and removing, MB
  • Lambretta Tool, Rear hub bearing fitting and removing, MB

£ 31.76
Price: £ 26.47 Ex Vat



Related Items (10)

Lambretta Bearing, Race-Tour standard 52.01 - 52.02mm, rear hub with seal and sealing O ring, Race-Tour, MB
MBP0275K

This is our standard sized 52.01 - 52.02mm MB Race-Tour rear hub bearing which fits all Series 1, 2 and 3 Lambrettas.  A quality bearing... [more]


£ 25.74£ 21.45 (Ex Vat)
Lambretta Bearing, rear hub only, Race-Tour, MB
MBP0469

This is our MB Race-Tour rear hub bearing (only) which fits all Series 1, 2 and 3 Lambrettas.    A quality bearing to suit... [more]


£ 21.54£ 17.95 (Ex Vat)
Lambretta Rear hub bearing plate, 0.3mm/flat recess, stainless steel, MB
MBP0470K

This is a new MB designed Rear Hub bearing plate.  Comes in stainless steel and is flat on one side and has a 0.3mm recess... [more]


£ 6.14£ 5.12 (Ex Vat)
Lambretta Rear hub bearing plate, 0.5/0.7mm recess, stainless steel, MB
MBP0471K

This is a new MB designed Rear Hub bearing plate. 1 of 3 sizes.  Comes in stainless steel and has a recess on one side... [more]


£ 7.00£ 5.83 (Ex Vat)
Lambretta Rear hub bearing plate, 0.9mm/1.2mm recess, stainless steel, MB
MBP0472K

This is a new MB designed Rear Hub bearing plate. 1 of 3 sizes.  Comes in stainless steel and has a recess on one side... [more]


£ 7.00£ 5.83 (Ex Vat)
Lambretta Rear hub bearing plate (kit) set of 3, stainless steel, MB
MBP0477K

This is a set of 3 of new MB designed Rear Hub bearing plates.  Comes in stainless steel.  MBP0470 comes with a flat face one side and... [more]


£ 20.14£ 16.78 (Ex Vat)
Lambretta Layshaft and Rear Hub Bearing with seals and O ring, set, MB
MBP0674K

MB top quality layshaft with matching MB rear hub bearing. Includes Layshaft Rear hub bearing Rear hub bearing seal Rear hub bearing O ring Layshaft O ring  ... [more]


£ 182.29£ 151.91 (Ex Vat)
Lambretta Tool, drift drive side and rear hub bearing, MB
MRB0866

A simple workshop tool made by MB Scooters. This drift helps knock the drive side and rear hub bearing into place. On assembly of the engine,... [more]


£ 30.20£ 25.17 (Ex Vat)
Lambretta Rear hub bearing O ring for MB bearings (Thick version)
MBP0660

Special Lambretta Rear hub bearing O ring for leter MB bearings. This is the thicker version which rolls over the bearing to create a seal... [more]


£ 0.37£ 0.31 (Ex Vat)
Lambretta Rear hub bearing O ring, MB
MBP0473

This O ring fits the latest MB rear hub bearings which have been machined to suit this using a seal. This is a first for... [more]


£ 0.78£ 0.65 (Ex Vat)


Reviews ( 1 )

 

5 star 1. David C 07 Feb 2024 

An exceptional tool for the perfect build at a very reasonable price

 
want to offer a review?
Click here

Questions?

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



If you feel something is not correct with this product description or image then please contact us using the same link