Lambretta Bearing, rear hub only, Race-Tour, MB

MBP0469

This is our MB Race-Tour rear hub bearing (only) which fits all Series 1, 2 and 3 Lambrettas.

A quality bearing to suit standard or tuned scooters. 

Now comes with slight improvements that standard bearings don't come with.

Comes with a new inner O ring design to help stop oil leaking around the bearing and casing.

Uses standard size rear hub seal 32 x 45 x 6mm.

If a standard supplied bearing drops into you casing ask for an oversized bearing as an exchange.

TOP TIP: use a bit of sealer smeared into the O ring groove, stretch the O ring over the bearing and push into the groove, otherwise the bearing will sit proud. Always use a bearing fitting tool to lock the bearing in place MRB0967



Lambretta Bearing, rear hub only, Race-Tour, MB
  • Lambretta Bearing, rear hub only, Race-Tour, MB
  • Lambretta Bearing, rear hub only, Race-Tour, MB

£ 21.54
Price: £ 17.95 Ex Vat



Temporarily out of stock

Notify Me

Related Items (3)

Lambretta Engine rear hub seal, MB
MBB0074

A high quality rear hub seal.    Fits all Series 1, 2 and 3 Lambretta rear hub bearings.    ... [more]


£ 4.20£ 3.50 (Ex Vat)
Lambretta Bearing, Race-Tour standard 52.01 - 52.02mm, rear hub with seal and sealing O ring, Race-Tour, MB
MBP0275K

This is our standard sized 52.01 - 52.02mm MB Race-Tour rear hub bearing which fits all Series 1, 2 and 3 Lambrettas.  A quality bearing... [more]


£ 25.74£ 21.45 (Ex Vat)
Lambretta Rear hub bearing O ring, MB
MBP0473

This O ring fits the latest MB rear hub bearings which have been machined to suit this using a seal. This is a first for... [more]


£ 0.78£ 0.65 (Ex Vat)


Features

  • Comes with chamfers making fitting the seal easier and safer on the inner lip, seal fits in the bearing easier
  • Comes with a new inner O ring to stop oil coming through from the gearbox
  • Uses a standard rear hub size seal (separate item)
  • Bearing outer sizes are slightly bigger to make a tighter fitting bearing

Technical

  • Pre heat the engine casing in the bearing area
  • If you want smear a small amount of silicone/gasket sealer on the bearing before fitting
  • Drop/tap the bearing in place, whilst still hot fit the thick rear hub bearing plate and nip the 4 nuts, this will pull the bearing in place and crush the new O ring
  • When the casing cools, remove the plate, oil the inner bearing race where the seal lip goes, leave the outer face on the bearing dry and push the seal in place, if its tight hammer down equally  

Reviews

there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Questions? ( 3 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Peter M on 19 Sep 2022 asked "What is the part number for an oversized bearing?"

MB Scooters Ltd replied: Same part number, you just need to call us

Steve B on 31 Aug 2022 asked "How much bigger is the oversize bearing? I've discovered that my MB rear hub bearing is loose in the casing."

MB Scooters Ltd replied: Oversized bearings can be as big as 0.15mm larger

Jeremy s on 22 Feb 2022 asked "Hi just fitted your mb rear bearing to a brand new uni casing. It didn't fall in but only took a light tap? "

MB Scooters Ltd replied: Some casings are like this, the simple cure is smear some bearing fit loctite around it, or if its really loose we can swap it for an oversized bearing



If you feel something is not correct with this product description or image then please contact us using the same link