Lambretta Electronic ignition stator plate, AC, BGM

MBGM0028

This is the new re-worked bgm stator plate with silicone wires V4.5.

Now comes with adjusting plates so the pickup can be raised.

Now comes with longer slots for more adjustment.

It only requires the standard 20 amp regulator.

These new stators are the most powerful you can get using a Lambretta flywheel.

TIP! When ever you replace an electrical ignition part always strobe and check timing is correct.



Lambretta Electronic ignition stator plate, AC, BGM
  • Lambretta Electronic ignition stator plate, AC, BGM
  • Lambretta Electronic ignition stator plate, AC, BGM
  • Lambretta Electronic ignition stator plate, AC, BGM
  • Lambretta Electronic ignition stator plate, AC, BGM
  • Lambretta Electronic ignition stator plate, AC, BGM
  • Lambretta Electronic ignition stator plate, AC, BGM

£ 98.23
Price: £ 81.86 Ex Vat



Related Items (17)

Lambretta Electronic ignition stator plate, DC, bgm (can also be used for AC)
MBGM0408

BGM's 12 Volt DC (direct current/battery type) stator plate. CAN ALSO BE USED FOR AC see wiring below.....    The ultimate Lambretta Stator plate to give the most power... [more]


£ 98.23£ 81.86 (Ex Vat)
Lambretta Electronic ignition flywheel, Gp, bgm
MBGM0293

New for 2013 and the final piece to the jig saw for the ultimate Lambretta ignition.    This is the new BGM GP flywheel... [more]


£ 180.66£ 150.55 (Ex Vat)
Universal Washer plain 6mm form A thicker, stainless steel
MBFPWA6

This fastener has universal applications.... [more]


£ 0.07£ 0.06 (Ex Vat)
Lambretta Screw, 6x25mm dome allen cap head, stator, crankcase sides and wishbones, stainless steel
MBFDAC6X25

Amongst many applications this fastener can specifically be used on the with AF type flywheels where clearance is tight.  It can also be used on... [more]


£ 0.18£ 0.15 (Ex Vat)
Lambretta Electronic ignition kit, DC, Gp (flywheel, stator, Blue CDI, rect) bgm
MBGM0448K

Full 12 Volt DC Electronic ignition.    Comes with BGM GP flywheel BGM 12 volt DC Electronic stator BGM Blue CDI coil BGM Rectifier Please take the time to... [more]


£ 335.18£ 279.32 (Ex Vat)
Lambretta Electronic ignition kit, AC, Gp (flywheel, stator, Blue CDI, reg/rec) bgm
MBGM0447K

Electronic ignition system ready to fit using all BGM parts for a GP crank taper BGM GP Electronic flywheel BGM maximum output AC stator plate BGM Blue... [more]


£ 324.06£ 270.05 (Ex Vat)
Lambretta Electronic ignition kit, DC, Gp (flywheel, stator, Red CDI, rect) bgm
MBGM0411K

Full 12 Volt DC Electronic ignition.    Comes with BGM GP flywheel BGM 12 volt DC Electronic stator V4 BGM Red CDI coil BGM Rectifier   Please take the... [more]


£ 335.18£ 279.32 (Ex Vat)
Lambretta Electronic ignition kit, AC, Li, Sx, Tv (flywheel, stator, Red CDI, reg/rec) bgm
MBGM0380

12 volt Electronic ignition system ready to fit using all BGM parts for a Tv, Li, Sx, crank taper    BGM Tv,... [more]


£ 319.87£ 266.56 (Ex Vat)
Lambretta Electronic ignition kit, AC, Gp (flywheel, stator, Red CDI, reg/rec) bgm
MBGM0378K

Electronic ignition system ready to fit using all BGM parts for a GP crank taper BGM GP Electronic flywheel BGM maximum output AC stator plate V4 BGM... [more]


£ 324.06£ 270.05 (Ex Vat)
Lambretta Electronic ignition coil (CDI) anti vibration rubber, MB
MRB0841

Simple idea from MB Scooters.    Electronic coils (CDI's) fail every now and then, this can sometimes can just be put down to vibration.    This rubber fits... [more]


£ 2.26£ 1.88 (Ex Vat)
Lambretta Electronic ignition coil (CDI) ignition rubber cover, MB
MRB0802

This is a new design from Mark Broadhurst for all Vespa style Electronic CDI coils    Ideal to help keep water and damp from... [more]


£ 9.77£ 8.14 (Ex Vat)
Lambretta Electronic, Stator plate, AC, Readspeed
MBL1690

Readspeed Lambretta AC Stator Plate. Key Features: 3 height Spaces to adjust pickup height, preset as 32mm. Pick now bolted to stator plate, rather than self taping... [more]


£ 99.00£ 82.50 (Ex Vat)
Lambretta Electronic ignition low tension coil 11mm
MBGM0025

This is a quality item,  usually a direct replacement on all Electronic stators.    Sometimes some small mods must be done to fit this... [more]


£ 13.03£ 10.86 (Ex Vat)
Lambretta Electronic ignition coil (CDI) Red, bgm
MBGM0243

This is a high quality BGM remade Electronic CDI coil to suit     Now comes in Red to give it that Genuine Innocenti CDI... [more]


£ 26.80£ 22.33 (Ex Vat)
Lambretta Electronic ignition coil (CDI) Blue, bgm
MBGM0365

BGM Electronic ignition CDI coil.    Fits all Lambretta and Vespa PX, P2, T5, PK electronic ignitions... [more]


£ 26.80£ 22.33 (Ex Vat)
Lambretta Electronic ignition anti vibration rubber (coil/regulator/rectifier) square small, MB
MRB0842

A simple idea from MB.    Regulators, Rectifiers and Regulator/Rectifiers can fail every now and then.    Some times this can only be put down to vibration.    These rubbers... [more]


£ 1.03£ 0.86 (Ex Vat)
Lambretta Electronic ignition pick up internal (pulse coil) Black box, bgm
MBGM0047

Every now and again pick- ups can fail, this is the BGM type.    TIP! When ever you replace an electrical ignition part always strobe and... [more]


£ 12.76£ 10.63 (Ex Vat)


Features


  • Highest powered stator.
  • Supplied with Black and Grey sleeving.
  • Supplied with extra long wiring.

Technical

  • Remade modern copies of the original Italian electronic stator plate.
  • Latest version comes with adjusting plates if required on certain set ups.
  • If when strobing the ignition timing if timing moves around, first port of call is change the electronic coil for a known working one.
  • If you can not gain the timing within the slots, consider a Kytronik Smart Booster and the advantages by fitting one

Development History

  • Developed to replace old existing stator plates.
  • Improved to give higher power outputs.

Reasons to Buy

  • Modern up to date engineering.
  • Direct swap.
  • Works with Italian or Indian flywheels.
  • High quality base plate casting.
  • Black and Grey sleeve supplied.
  • Extra long wires if required.

Tips

  • Always check and reset ignition timing.
  • Always strobe ignition to check timing is correct.
  • Always check the black pick up box doesn't rub on the flywheels inner face before the flywheel is torqued down.
  • If pickup rubs read instructions supplied.
  • If you are using a standard Vespa regulator, these are well within the 15 amperes required.

Reviews ( 13 )

 

5 star 1. Giacomo P 27 Sep 2008 

The nicest stator I have ever purchased, top quality craftsmanship, works great, Thank you very much MRB

 
 

5 star 2. BigRich 03 Jun 2009 

I have been running one of these for a while now. I cannot recommend highly enough Another fabulous product Thanks MB

 
 

5 star 3. Rob 22 Sep 2017 

Great product, great service and quick postage to Australia.

 
 

5 star 4. Ian T 24 May 2016 

A solid well made stator An absolute must to a Lambretta electrical system It's transformed mine after an Indian stator before this.

 
 

5 star 5. Grahame N 28 Jul 2016 

Great piece of kit, well made and good quality

 
 

5 star 6. Ken 27 Oct 2016 

Great product. Fitted well. The extra packing pieces are engineered really well. Made setting the pick up height really easy.

 
 

5 star 7. Ken 25 Nov 2016 

The difference between this and my previous stators is nothing less than remarkable. Its like I have a different scooter. My scooter starts with the slightest of kicks and I no longer have to twist the throttle frantically to keep the engine idling. You really do get what you pay for.

 
 

5 star 8. Andy M 31 Jul 2018 

scooter purring like a kitten , highly recommended

 
 

5 star 9. Gareth R 25 Jul 2017 

Would of given it ten stars brilliant bit of kit keep up the good work will be back for sure

 
 

5 star 10. Mike s 07 Feb 2018 

fast delivery thankyou. at present havent fitted it

 
 

5 star 11. David T 29 Jul 2020 

Looks well made easy enough to fit. Starts and runs Great. Very happy with it.

 
 

5 star 12. Terry j 27 May 2023 

Looks a well built piece all solder joints seal Was going to convert to dc but looks like not built to be messed with

 
 

5 star 13. Giles 23 Mar 2024 

Another quality part from MB. Really easy to fit with the BGM flywheel. Timing marks on both make setting timing quick and easy. Nice output for lights.

 
want to offer a review?
Click here

Questions? ( 13 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!



Grant M on 07 Jan 2023 asked "Trouble shooting, scooter not revving out at high revs. Running BGM stator with an indian long fin flywheel & want to check the alignment of pick up to stator. Am i just ensuring that both pick up sensors are aligning with flywheel magnets? And if not i use the packets supplied to increase height on pick up? Thanks, G."

MB Scooters Ltd replied: Thats correct

Peter K on 07 Oct 2022 asked "Hi have low voltage from lighting circuit om bgm stator on lambretta what should resistance be between white and yellow wires ??? Thank you "

MB Scooters Ltd replied: Should be about 2.25 ohms or 1.14mH

David H on 21 Apr 2022 asked "I have bought this stator and the BGM GP flywheel ,but when fitted I am getting no spark any ideas on what I need to check .Could it be the CDI .My Scooter is a li 150 with GP crank and your 195/225 race tour kit."

MB Scooters Ltd replied: We've had no issue from new flywheels and stators. I can check them, but check the CDI first, and trapped wire inside the flywheel area and check youve fitted the correct colours in the CDI

Fergus O on 04 Feb 2021 asked "Might be silly, but can I run this stator with a flywheel that spins the other way i.e. An LD ( or an ISO ) Cheers"

MB Scooters Ltd replied: No it wont work

John M on 19 Oct 2020 asked "Good afternoon, I have an AF Mid Weight Electronic Flywheel GP Type, would this flywheel be suitable for this particular stator. Thank you. John J"

MB Scooters Ltd replied: Yes its a straight fit

Paul on 08 Oct 2014 asked "Can I run this stator with the older type rectifier, or do I need the newer type? "

MB Scooters Ltd replied: Yes it is a straight swap

George s on 23 May 2014 asked "Hi can you tell me have you improved your stator plate for a AF fly wheel as I am thinking of buying one "

MB Scooters Ltd replied: They are supposed to be now

Richard on 09 Aug 2011 asked "How has the stator been improved, and what wattage is it now putting out?"

MB Scooters Ltd replied: Tested and rewired to get the most power output from the flywheels magnetism. Theres talk of 120 Watts, but this is the limit set by the magnets.

Mark D on 15 May 2011 asked "I have a question about "Electronic stator plate, BGM type, 120W, version 2" What flywheel would you recommend for this when using with an Imola kit and Agusto retard unit -- looking for alternative to varitronic."

MB Scooters Ltd replied: The BGM stator works well with the Indian flywheels for this purpose.

Russ on 03 Jun 2010 asked "I have a question about "Electronic stator plate, BGM type, 120W version"Hi, can you tell me why you advise to not use with the af later type flywheel""

MB Scooters Ltd replied: There are difference with lots of flywheels, some can produce a miss fire, the AF flywheel has brass rivets which seem to cause a miss fire, we are working to improve the BGM stator to improve them and work with all flywheels for the future.

Kevin W on 14 Mar 2010 asked "I have a question about "Electronic stator plate, BGM type, 120W version" Hi Mark, Can I use this stator with my original gp150 Italian flywheel, as I'm still running 6v points electrics ? Thanks for any advice."

MB Scooters Ltd replied: No, this is a electronic type stator, you require a points type stator or you could swap for a complete electronic kit.

Ian m on 11 Dec 2008 asked "Hi Mark, How does the standard 12V ac regulator stand up to the increased output? Is there any reduction in lifespan? Thanks, ian"

MB Scooters Ltd replied: The standard regulator is well within the safe working operation of the 120 watt stator.

Dave W on 31 Jul 2008 asked "I have a question about "Electronic stator plate, BGM type, 120W version" Recently purchase from you a new Ducati CDI and regulator along with your mounting kit . It looks great as I can put the new items under the rear frame where they should be. It was a tough job, especially when I replaced all of the wiring without removing the floor boards or legshield! Anyway, when I looked at the old stator wire sleeving, I noticed two things: The white wire in the sleeve was actually broken and was just sitting in the stator loom. Secondly, the wire loom was not long enough to now reach the new CDI with its new location, as my old wiring system had an ugly unction box on the panel bracket Can I fit the BGM 120 v stator to my Indian GP with an indian flywheel? Is the BGM stator wire long enough to reach the CDI in its new position? What tools would I need to install it? Does the BMG stator have long enough wiring to reach the CDI (right side) without the need for a junction box by the stator? If I make the purchase, what other tools would I need for the install and do you carry them?"

MB Scooters Ltd replied: The BGM stator comes with long wires that can fit anywhere in the area where our mounting brackets fit.



Using our loom means you do not require the junction box.

To fit a new stator you will require a flywheel holding tool and flywheel extractor.



You will also require some timing equipment.

Refer to the Spanners manual on how to do the job.



If you feel something is not correct with this product description or image then please contact us using the same link