This is a standard throttle cable inner cable.... [more]

Amongst many applications this fastener can specifically be used on: Lambretta petrol tap rod Lambretta rear brake pedal clamp assembly Lambretta headset throttle return spring    Note:... [more]

This fastener has universal applications but is mainly used for Lambretta rear brake pedal clamps.... [more]

This trunnion fits on the end of a universal throttle inner cable inside the throttle roller.    Worth keeping a spare in your glove... [more]

This nipple sits inside your handlebar lever and holds the end of some inner cables. A MB product made in stainless steel.... [more]

These bellows go over the control cables to protect the inners from the elements.... [more]

This piece of black tube goes around the cables as they pass near the cylinder and choke cable assembly to protect them. This new improved... [more]

This piece of grey tube goes around the cables as they pass near the cylinder and choke cable assembly to protect them. This new improved... [more]

This is a quality remade black rubber for your rear brake pedal.... [more]

This is a quality remade grey rubber for your rear brake pedal.... [more]

This gasket fits between the engine casing and the cable adjuster block.    Remade for MB.... [more]

This trunnion is used on a standard throttle cable at the carburettor end for adjustment. A quality MB made Brass item which comes with a... [more]

These bellows fit over your rear brake cable inner where it is exposed between the top hat and the brake pedal.... [more]

This piece of sleeve fits on the clutch outer cable to protect it from the elements and road dirt.  It works in convunction with a... [more]

It might seem picky but we had these discs made to fit inside the cable trunnion.    We fit one to each trunnion but they are... [more]

This stainless steel strap secures the control cables to the frame, near the junction of the fork stem and the frame. Another top quality made... [more]

This is a stainless steel rear brake top hat bush one sits in your engine casing and one sits in your frame for the... [more]

This washer sits in your fork link to hold your spindle (and hub!) in place so it is important it is the right size... [more]

This is a MB remade cable adjuster screw complete with nut, all in stainless steel.    No more going to adjust your cables to... [more]

The original item was exposed to the elements and will rust in a short time.    Now redesigned and remade with a lighter version... [more]

This is another part that we've looked at and said they go rusty and spoil a nice engine so we have remade these in... [more]

MB remade cable trunnion in stainless steel with a stainless steel grub screw like original and uses a 3mm allen key not the oddball... [more]

This is a MB remade stainless steel clevis pin suitable for use with a rear brake pedal clamp assembly.... [more]

This is a remade rear brake pedal bush in hard wearing nylon.    Remade by MB. ... [more]

This is a quality CNC machined stainless steel rear brake pedal clamp bolt. A MB product.... [more]

This is a laser cut stainless steel rear brake pedal clamp.    You need two per scooter or why not buy our handy clamp kit which... [more]

This is a remade nut bolt and washer for the rear brake pedal clamp.    It is part of the full kit but is here separately... [more]

This is our MB remade Stainless Steel choke cable clamp for all Series 3 Lambrettas.    It bolts to the back of your choke lever assembly... [more]

This MB laser cut stainless steel 1mm shim can be used on the gear arm clutch arm brake cam and rear brake pedal.... [more]

MB remade cable ties to secure your cables and loom to your frame.   These are now improved stainless steel as originals are prone to... [more]

This is a MB remade rear brake pedal spring in stainless steel.... [more]

We had these front brake adjusters remade in stainless steel even the spring.    Why spoil your scooter re-using the old one? An MB product at its... [more]

Complete rear brake adjuster assembly, completely made in stainless steel.    Why spoil your scooter re-using the old one? Another quality MB product.... [more]

This remade bracket sits under the cable adjuster block and holds the rear brake cable away from the rear wheel.    JANUARY 2013 - These... [more]

This MB remade precision laser cut stainless steel shim fits on the gear pivot base on standard type gear pivot bases.    It is... [more]

This MB remade precision laser cut stainless steel shim fits between the rear brake pedal and the frame.... [more]

This is a complete Mark Broadhurst designed Series 3 rear brake pedal kit with the cable, brake arm and adjuster. The kit includes: Rear brake pedal,... [more]

This is a complete Mark Broadhurst designed Series 3 rear brake pedal kit with the cable, brake arm and adjuster. The kit includes: Rear brake pedal,... [more]

This is a complete Mark Broadhurst designed Series 3 rear brake pedal kit. Which includes: Rear brake pedal, hardened rust resistant (some may come in painted... [more]

This is a complete Mark Broadhurst designed Series 3 rear brake pedal kit. Which includes: Rear brake pedal, hardened rust resistant (some may come in painted... [more]

This gasket fits between the engine casing and the gear pivot base.    Remade for MB.... [more]

A new design by Mark Broadhurst.    Some modern front brake cables come in two parts to allow for a front brake cable.    To connect the cable... [more]

This handy kit contains two clamps, the special bolt, nut, clevis pin and split pin.    Everything you need for the brake cable end of the... [more]

This handy kit contains everything you need to overhaul your rear brake pedal. 12mm shim brake... [more]

Various types of screw have been used in a gear trunion, this is the one MB use in their gear trunnion.... [more]

This is a NOS part fitted into a choke assembly.... [more]

This is a NOS choke assembly return spring.... [more]

Remade MB Series 3 rear brake pedal. Made from high strength rust resistant steel (some may come painted in Silver).  Slightly modified to put a greater... [more]

Lambretta Front brake adjuster, just the main threaded rod. Stainless steel, MB made.... [more]

... [more]

... [more]

Lambretta MB friction free choke cable in Black. This is a standard length version that fits carbs on either side. Perfect fit, no cutting/adjustment or extra... [more]

Lambretta grey friction free rear brake cable with threaded inner, MB  Super strong, Nylon lined grey outer and threaded inner cable. MB's new QA rear brake inner... [more]

Good quality perfect fitting nylon lined Black clutch cable.... [more]

Lambretta stainless super strong friction free rear brake cable with threaded inner. Comes with nylon lined friction free stainless steel outer cable, MB Braided stainless steel... [more]

Lambretta Grey super strong friction free rear brake cable with threaded inner. Comes with nylon lined friction free outer cable, MB Braided stainless steel inner with... [more]

Lambretta MB friction free choke cable in Grey. This is a standard length version that fits carbs on the left side and uses the standard... [more]

Lambretta Braided friction free rear brake cable with threaded inner, MB  Super strong, Nylon lined, stainless steel braided outers with clear coat cover and threaded... [more]

A handy little spare part that always seems to disappear. These haven't been available until we remade them. Before that all you could do was buy a... [more]

Grey nylon lined rear brake cable with standard type inner cable. Fits all series 1, 2 and 3 Lambrettas.... [more]

Lambretta MB friction free choke cable in Black. This is a slightly shorter length version that fits carbs on the right side for TS1/RB/SS type... [more]

Lambretta MB friction free choke cable in Grey. This is a slightly shorter length version that fits carbs on the right side for TS1/RB/SS type... [more]

The small cable top hat with slit in it, that sits in the round hole in the hub and then the cable sits in... [more]

Lambretta rear brake cable inner, with threaded end. Includes stainless steel barrel, nut, washer. An MB product. Inner length - 910mm plus threaded part 75mm = Total... [more]

We had this throttle cable specially made to suit any Lambretta (Series 1, 2 or 3) with a small carburettor fitted.  It comes complete with... [more]

This precision MB linkage kit is designed by Mark Broadhurst and consists of:   Adjuster block, new MB type in hardened steel, MB Adjuster screws x 3,... [more]

MB made front brake cable for standard drum and disc hubs in Black. Perfect fitting, nylon lined and friction free.... [more]

Lambretta black friction free rear brake cable with threaded inner, MB  Super strong, Nylon lined black outer and threaded inner cable. MB's new QA rear brake... [more]

Universal cable ferrule the part at the end of each cable.    Fits any cable.    Ideal if you shorten a cable, just lightly... [more]

Spare Lambretta gear inner cable for the MB stainless friction free cables.    Also fit other outer cables.... [more]

We had these rear brake adjusters remade in stainless steel even the spring.  Why spoil your scooter re-using the old one? An MB product at its best. Use the... [more]

Lambretta Black super strong friction free rear brake cable with threaded inner. Comes with nylon lined friction free outer cable, MB Braided stainless steel inner with... [more]

Grey rear brake cable, perfect fitting and friction free nylon lined. This version comes with a standard inner cable. Another quality MB product.... [more]

Good quality perfect fitting nylon lined Black gear cable.... [more]

Black rear brake cable, perfect fitting and friction free nylon lined. This version comes with a standard inner cable. Another quality MB product.... [more]

... [more]

Rear brake cable, braided stainless steel type. Perfect fitting and friction free nylon lined. This version comes with a standard inner cable. Another quality MB product.... [more]

This special nut is used on the front and rear brake adjusters on Lambretta GP/DL model scooters. It is made from stainless steel.... [more]

We had these front brake adjusters remade in stainless steel even the spring.  Why spoil your scooter re-using the old one? An MB product at its... [more]

Lambretta Rear brake cable adjuster clamp. Stainless steel, MB... [more]