 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
Fork springs, uprated 3 stage progressive (tightly wound spring to top) pair, MRB
|
 |
|
Click image for a closer look
|
Normal fork springs work at the same rate on and off no matter what the load is.
Old springs go coil bound and weak, Indian springs can go coil bound and weak as you are fitting them!
Mark designed these special three stage progressive springs to suit all Lambrettas be it race or road.
These three stage springs are computer designed to give a soft feel under normal driving, they increase in strength under braking on large bumps and stiffen even more when under full race braking.
These are the ultimate Lambretta fork springs ever designed.
Another tested product designed by Mark Broadhurst.
Fit them with the tightly wound springs at the top, if not sure balance the spring in the middle of your finger the heavy end will show up.
TOP TIP, there will not be much difference with tight coils at the top or bottom, on the computer they work the same, its all about sprung and unsprung weight, either way always fit the tightly wound springs in the same position.
This is another product especially made in England for MB Developments.
If you want to stiffen the front end, fit our thicker fork stops.
|
|
|
Ask a Question?
If you would like to ask us a question about this product, please feel free to click here to Ask a Question
1 RK on 11 Dec 2009 asked "Should these be installed thick coiling facing up or down, or does it matter at all?"
Mark replied:
As it says in the title (tightly wound spring to top) |
If you feel something is not correct with this product description or image then please contact us using the same link
|
|
 |
 |
 |
 |
 |
|
 |
 |
 |
|
 |
|