Rear hub bearing, Race-tour.


This is our remade MRB Race-Tour rear hub bearing to fit all Series 1, 2 and 3 Lambrettas.

A quality bearing to suit standard or tuned scooters.


 

 Rear hub bearing, Race-tour.
MBP0006
£ 30.48
Price: £ 25.40 Ex Vat
   Temporarily out of stock
Please check back later

 

 

1. MBL0344 Rear hub bearing plate £ 3.96 £ 4.96 (Ex vat price: £ 3.30)

This plate holds the rear hub bearing in place....Rear hub bearing plate Add :
 
 

2. MBL0345 Rear hub bearing plate shim £ 1.52 £ 1.52 (Ex vat price: £ 1.27)

This shim fits between the plate and the casing.    It keeps the rear hub seal in place....Rear hub bearing plate shim Add :
 
 

3. MBB0034 Layshaft needle bearing 0 (Ex vat price: 0)

A high quality layshaft needle bearing.   This is the one that sits in your gearbox endplate where the end of...Layshaft needle bearing Add :
 
 

4. MBP0236K Gp200 Bearing upgrade kit, includes bearings, seals, gaskets, screws and drive plate, MRB 0 (Ex vat price: 0)

This kit contains all the parts you would need when changing your crank to one of our Alpha cranks or...Gp200 Bearing upgrade kit, includes bearings, seals, gaskets, screws and drive plate, MRB Add :
 
 

5. MBB0013 End plate roller bearing 0 (Ex vat price: 0)

This is a high quality end plate roller bearing.   It fits into the end plate and the gear cluster goes...End plate roller bearing Add :
 
 

6. MBB0031 Drive side bearing, Road / Race Touring type with extra seal 0 (Ex vat price: 0)

A high quality Touring Road drive bearing to suit all Series 1, 2 and 3 engine casings.    MRB were the first...Drive side bearing, Road / Race Touring type with extra seal Add :
 
 

7. MBB0030 Drive side bearing, standard 0 (Ex vat price: 0)

A high quality standard drive bearing to suit all Series 1, 2 and 3 engine casings....Drive side bearing, standard Add :
 
 

8. MBB0112 Small end bearing, INA 16x20x20mm 0 (Ex vat price: 0)

This German made bearing is ideal as an upgrade in most pistons. This is the only small end bearing where we...Small end bearing, INA 16x20x20mm Add :
 
 

9. MBB0035 Clutch needle bearing, Li, Sx, Tv (you require two) 0 (Ex vat price: 0)

A high quality clutch needle bearing.    Used as standard on Li, SX, TV models.    You need two per engine.    Only use these in...Clutch needle bearing, Li, Sx, Tv (you require two) Add :
 
 

10. MBB0033 Gear cluster needle roller bearing 0 (Ex vat price: 0)

A high quality gear cluster needle bearing.   This sits in your engine casings underneath the gear cluster....Gear cluster needle roller bearing Add :
 
 

11. MBB0009 Flywheel bearing, Li, Sx, Tv, Gp 125, 150, 175 0 (Ex vat price: 0)

A high quality flywheel bearing to suit all non-GP200 crankshafts.    It fits Li, SX, TV crankshafts...Flywheel bearing, Li, Sx, Tv, Gp 125, 150, 175 Add :
 
 

12. MBB0010 Flywheel bearing Gp200 0 (Ex vat price: 0)

A high quality, high load flywheel bearing to suit all GP200 crankshafts, road or race....Flywheel bearing Gp200 Add :
 

 

Fitted Pictures


 
there are no customer reviews at present
want to be the first to offer a review?
to place a review click here

Ask a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question



 

Arkaitz on 07 Dec 2009 asked "I have a question about "Rear hub bearing, Race-Tour, MRB" Hi. I am putting this bearing into my Spanish engine, but i have some questions: -I can put the bearing with my hand very easy in the engine. Is this normal? -With the bearing inside the engine, the bearing in the inside of the engine looks good, but in the outside, the bearing come out 2mm. Is this a problem? I can send you pics if you need. Thanks for your attention and sorry for my English. Cheers. "

MB Group, Serious Outdoors Ltd replied: Casings do vary old and new. I doubt it is the bearing but if you find it is please return it for inspection. Spanish casings do cause the bearing to sit higher, its not a problem if you carefully set the gearbox up. Be careful not to over tighten the four studs which hold the plates.

 
 

S?bastien M on 05 Nov 2008 asked "I have a question about "Rear hub bearing Lambretta" Hello MRB, i've bought one of this new racetour bearing : Is it normal ( and safe ) that a new SIL layshaft could be inserted completely in its location and withdrawn from it by hand ( without tooling or soft hammering ) ? If yes, do you recommend to seal the layshaft inside the inner track with loctite added to the dedicated o ring ? Thank you in advance for your detailed reply Sebastien"

MB Group, Serious Outdoors Ltd replied: On occasions even Innocenti bearings and layshafts do this, when I fit layshafts into rear hub bearings I always loctite the shaft into a bearing and always use a new O ring.

 
 

Sebastien M on 21 Jul 2008 asked "I have a question about "Rear hub bearing Lambretta" Hello MRB is this bearing the mbd race tour new bearing as featured in scootering and allready sold by german scootershop , If not where is it featured on the website . Thanks"

MB Group, Serious Outdoors Ltd replied: Yes this is our Race-Tour rear hub bearing, we have merged it into the old type rear hub bearing and to date have not updated the information.

 


If you feel something is not correct with this product description or image then please contact us using the same link